Oil Cooler Bypass Valve
Usage:
Remove Oil Cooler Bypass Valve
1. Drain the oil filter housing.
2. Remove the elbow (1).
3. Remove the four valve mounting bolts (2).
4. Remove the oil cooler bypass valve (3).
Install Oil Cooler Bypass Valve
1. Position the oil cooler bypass valve on engine, and install mounting bolts.
2. Install the four elbow mounting bolts.
3. Check the oil level in crankcase and fill as necessary.
Disassemble Oil Cooler Bypass Valve
preparatory step:
a) remove oil cooler bypass valve
1. Remove the valve cover plate.
2. Remove the oil cooler bypass valve spring and plunger.
Assemble Oil Cooler Bypass Valve
1. Clean all parts thoroughly before assembling valve.
2. Lubricate the plunger and bore in housing with clean SAE 30 crankcase oil.
3. Install plunger and spring in housing.
4. Install cover plate.
concluding step:
a) install oil cooler bypass valve
Caterpillar Information System:
G333C ENGINE Alternator Regulator
G333C ENGINE Alternator
G333C ENGINE Solenoid Switch
G333C ENGINE Starting Motors
G333C ENGINE Magneto Drive
G333C ENGINE Ignition System
G333C ENGINE Governor Linkage (Hydra-Mechanical Governor)
G333C ENGINE Governor
G333C ENGINE Service Meter
G333C ENGINE Water Pump
G333C ENGINE Cooling System Pressure Cap (6L8617)
G333C ENGINE Water Temperature Regulator (4L7615)
D346 INDUSTRIAL ENGINE Engine Oil Cooler
D346 INDUSTRIAL ENGINE Connecting Rod Bearings
D346 INDUSTRIAL ENGINE Oil Pan Base
D346 INDUSTRIAL ENGINE Oil Pump
D346 INDUSTRIAL ENGINE Crankshaft Main Bearings
D346 INDUSTRIAL ENGINE Piston Cooling Jets
D346 INDUSTRIAL ENGINE Fuel Priming Pump
D346 INDUSTRIAL ENGINE Water Temperature Regulators
D346 INDUSTRIAL ENGINE Fuel Filter Housing
D346 INDUSTRIAL ENGINE Oil Filter Housing
D346 INDUSTRIAL ENGINE Alternator
D346 INDUSTRIAL ENGINE Vibration Damper And Hub