Oil Pan Base
Usage:
Remove Oil Pan Base
1. Drain cooling system.
2. Drain the oil pan base - capacity 351/2 U.S. Gal. (134 ltr).
3. Remove the oil pan base-to-engine mounting bolts.
4. Attach a hoist and raise the engine - weight 6000 lbs. (2722 kg).
5. Remove the oil pan base from under the engine.
Install Oil Pan Base
1. Position the oil pan base under engine.
2. Lower the engine to the oil pan base.
3. Install oil pan base mounting bolts.
4. Fill the crankcase to specified capacity.
5. Fill the cooling system.
Caterpillar Information System:
D346 INDUSTRIAL ENGINE Connecting Rod Bearings
D346 INDUSTRIAL ENGINE Engine Oil Cooler
D346 INDUSTRIAL ENGINE Oil Cooler Bypass Valve
G333C ENGINE Alternator Regulator
G333C ENGINE Alternator
G333C ENGINE Solenoid Switch
G333C ENGINE Starting Motors
G333C ENGINE Magneto Drive
G333C ENGINE Ignition System
G333C ENGINE Governor Linkage (Hydra-Mechanical Governor)
G333C ENGINE Governor
G333C ENGINE Service Meter
D346 INDUSTRIAL ENGINE Oil Pump
D346 INDUSTRIAL ENGINE Crankshaft Main Bearings
D346 INDUSTRIAL ENGINE Piston Cooling Jets
D346 INDUSTRIAL ENGINE Fuel Priming Pump
D346 INDUSTRIAL ENGINE Water Temperature Regulators
D346 INDUSTRIAL ENGINE Fuel Filter Housing
D346 INDUSTRIAL ENGINE Oil Filter Housing
D346 INDUSTRIAL ENGINE Alternator
D346 INDUSTRIAL ENGINE Vibration Damper And Hub
D346 INDUSTRIAL ENGINE Crankshaft Front Seal
D346 INDUSTRIAL ENGINE Front Timing Gear Cover
D346 INDUSTRIAL ENGINE Front Balancer And Idler Gear