Usage:
1. Disconnect hoses (1), (2), (3) and (4) from the air compressor.
2. Remove three bolts (5) and the washers.
3. Remove three support bolts (6) and the washers. Remove the air compressor by pulling straight out of the drive in the front housing.
NOTE: The following steps are for the installation of the air compressor.
4. Check the condition of the gasket used between the air compressor and the front housing. If the gasket is worn or damaged, use a new part for replacement. Install the gasket on the air compressor.
5. Position the air compressor in the front housing. Be sure the drive gear engages correctly with the gear in the front housing. Install three support bolts (6) and the washers.
6. Install three bolts (5) and the washers.
7. Connect hoses (4), (3), (2) and (1) in their original locations.