Electronic Control Module (ECM)
Usage:
Remove & Install Electronic Control Module (ECM)
1. Disconnect fuel lines (1) and (3) from the electronic control module.
2. Remove Allen head screw (4). Disconnect electrical connector (5).
3. Remove four bolts (6). Remove ground wire (2). Remove electronic control module (7).
4. Drain the fuel from the electronic control module into a suitable container for disposal.
NOTE: The following steps are for the installation of the electronic control module.
5. Install the electronic control module in the reverse order of removal.
NOTE: For information regarding the disassembly and assembly of the Electronic Control Module, see the "Electronic Troubleshooting" module, Form No. SENR6497.
Caterpillar Information System:
G3306 TRUCK ENGINE Testing And Adjusting
G3306 TRUCK ENGINE Systems Operation
G3306 TRUCK ENGINE Starting Motor
G3306 TRUCK ENGINE Flywheel Housing Bore
G3306 TRUCK ENGINE Flywheel Housing Runout
G3306 TRUCK ENGINE Flywheel Runout
G3306 TRUCK ENGINE Flywheel Housing
G3306 TRUCK ENGINE Flywheel
G3306 TRUCK ENGINE Trunnion
G3306 TRUCK ENGINE Crankshaft Pulley
G3306 TRUCK ENGINE Timing Gear Cover
G3306 TRUCK ENGINE Connecting Rod And Main Bearings
3176B INDUSTRIAL ENGINE Personality Module (PM)
3176B INDUSTRIAL ENGINE Electric Starting Motor
3176B INDUSTRIAL ENGINE V-Belts
3176B INDUSTRIAL ENGINE Alternator
3176B INDUSTRIAL ENGINE Air Compressor
3176B INDUSTRIAL ENGINE Oil Filter & Oil Filter Base Assembly
3176B INDUSTRIAL ENGINE Oil Cooler
3176B INDUSTRIAL ENGINE Water Pump
3176B INDUSTRIAL ENGINE Coolant Conditioner
3176B INDUSTRIAL ENGINE Engine Oil Pump
3176B INDUSTRIAL ENGINE Fuel Priming Pump
3176B INDUSTRIAL ENGINE Fuel Filter & Fuel Filter Base