793F Off-Highway Truck Machine Systems Caterpillar


Rear Suspension - Remove and Install

Usage:

793F D3T

拆卸步骤

表 1
所需工具    
工具     零件号     零件描述     数量    
A     3S-6224     电动液压泵总成     1    
9U-6815 拉拔器螺柱     1    
7Y-1460 螺母     1    
380-5720 接收衬套     1    
5P-5201 双作用油缸     1    

开始:

  1. 拆下后轮胎。



    图 1g01659653

  1. 拆下夹子 (3) 后将软管组件放到一旁。

  1. 断开润滑脂软管 (1) 然后拆下挡块 (2) 。



    图 2g01659714

  1. 拆下盖 (4) 。



    图 3g01659793



    图 4g01659994

  1. 将适当的起吊设备连接至连杆组件 (5) 上。 连杆组件 (5) 的重量约为 417 kg (919 lb)。

  1. 将适当的起吊设备连接到工具 (A) 上。 工具 (A) 的重量约为 209 kg (460 lb)。

  1. 将工具 (A) 定位到销 (6) 上。 拆下销 (6) 。 销 (6) 的重量约为 77 kg (170 lb)。

  1. 对另一根销重复步骤 5 和 6。

  1. 拆下连杆组件 (5) 。

  1. 对其余的连杆重复步骤 1 至 8。



    图 5g01659994

  1. 拆下每根连杆的挡圈 (7) ,然后拆下轴承 (8) 。

安装步骤

  1. 按相反顺序安装悬架连杆 (5) 。

Caterpillar Information System:

2009/12/17 Hex Systems With CAES Can Now Utilize a Combination of Various Angle Sensors {1439, 7858}
Supplemental Parts Information for the USN Seabee 815F Series 2 Soil Compactor{7000} Supplemental Parts Information for the USN Seabee 815F Series 2 Soil Compactor{7000}
Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561} Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561}
2010/01/21 A New Story Has Been Added to Disassembly and Assembly Manuals for certain Skid Steer Loaders and Multi Terrain Loaders {1122, 6459}
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Engine Supplement Radiator, Refrig Condenser, and Hyd and TMSN Oil Cooler - Install
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Engine Supplement Fuel Priming Pump and Primary Filter (Water Separator) - Remove and Install
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Engine Supplement Turbocharger - Remove and Install
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Engine Supplement Fan Drive - Remove and Install
CD54 Vibratory Compactor Machine Systems System Pressure - Release
795F AC and 795F AC XQ Off-Highway Trucks Prepare the Machine for Maintenance
2009/12/24 A New Design for the Secondary Steering Relay is Now Used on Some M-Series Motor Graders {1408, 4344, 7499}
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Power Train Electronic Control System Switch Circuits
2010/01/06 A New Retaining Pin Should Be Used When the Master Link is Reassembled on the RM-500 Road Reclaimer/Soil Stabilizer {5631}
A Replacement Procedure for the A/C Hose on Certain Motor Graders is Now Available{1808, 7320} A Replacement Procedure for the A/C Hose on Certain Motor Graders is Now Available{1808, 7320}
2009/12/23 A New Procedure in Order to Replace the Tube Assembly on the Frame of the 797 and the 797B Off-Highway Truck is Now Available {7051, 7960}
793F Off-Highway Truck Machine Systems Solenoid Valve (Automatic Lubrication) - Remove and Install
Backhoe Loader Cylinder Rods are Scored or Pitted{5456} Backhoe Loader Cylinder Rods are Scored or Pitted{5456}
793F Off-Highway Truck Machine Systems Gear Pump (Brake Cooling) - Remove and Install
Loss of Configuration Data on Articulated Trucks{7610, 7620} Loss of Configuration Data on Articulated Trucks{7610, 7620}
C13, C15, and C18 Tier 4 Interim Engines Ether Starting Aid - Test
793F Off-Highway Truck Machine Systems Relief Valve (Brake Oil Cooling) - Remove and Install
793F AC, 795F AC, and 795F AC XQ Off-Highway Trucks Monitoring System Diagnostic Code List
584 and 584HD Forwarders Engine Supplement Aftercooler - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Cooling System - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.