2009/12/17 Caterpillar


Hex Systems With CAES Can Now Utilize a Combination of Various Angle Sensors {1439, 7858}

Usage:

- 2TZ
Machine Control & Guidance Products:
CAES ULTRA (S/N: 2TZ1-UP)

New CAES software will allow Hex Systems with CAES to utilize a combination of various angle sensors. The CAES software (v3.2.2) utilizes the AS7 and the AS300 sensors on the same machine. Refer to Service Magazine, SEPD1045 for software access, registering, and upgrading procedures. Refer to Special Instruction, REHS4693 for installation procedures for the sensors.

Note: The AS300 sensors include the AS450 and the AS460.

Caterpillar Information System:

Supplemental Parts Information for the USN Seabee 815F Series 2 Soil Compactor{7000} Supplemental Parts Information for the USN Seabee 815F Series 2 Soil Compactor{7000}
Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561} Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561}
2010/01/21 A New Story Has Been Added to Disassembly and Assembly Manuals for certain Skid Steer Loaders and Multi Terrain Loaders {1122, 6459}
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Engine Supplement Radiator, Refrig Condenser, and Hyd and TMSN Oil Cooler - Install
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Engine Supplement Fuel Priming Pump and Primary Filter (Water Separator) - Remove and Install
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Engine Supplement Turbocharger - Remove and Install
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Engine Supplement Fan Drive - Remove and Install
CD54 Vibratory Compactor Machine Systems System Pressure - Release
795F AC and 795F AC XQ Off-Highway Trucks Prepare the Machine for Maintenance
2009/12/24 A New Design for the Secondary Steering Relay is Now Used on Some M-Series Motor Graders {1408, 4344, 7499}
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Power Train Electronic Control System Switch Circuits
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Power Train Electronic Control System MID 027 - CID 3210 - FMI 06
793F Off-Highway Truck Machine Systems Rear Suspension - Remove and Install
2010/01/06 A New Retaining Pin Should Be Used When the Master Link is Reassembled on the RM-500 Road Reclaimer/Soil Stabilizer {5631}
A Replacement Procedure for the A/C Hose on Certain Motor Graders is Now Available{1808, 7320} A Replacement Procedure for the A/C Hose on Certain Motor Graders is Now Available{1808, 7320}
2009/12/23 A New Procedure in Order to Replace the Tube Assembly on the Frame of the 797 and the 797B Off-Highway Truck is Now Available {7051, 7960}
793F Off-Highway Truck Machine Systems Solenoid Valve (Automatic Lubrication) - Remove and Install
Backhoe Loader Cylinder Rods are Scored or Pitted{5456} Backhoe Loader Cylinder Rods are Scored or Pitted{5456}
793F Off-Highway Truck Machine Systems Gear Pump (Brake Cooling) - Remove and Install
Loss of Configuration Data on Articulated Trucks{7610, 7620} Loss of Configuration Data on Articulated Trucks{7610, 7620}
C13, C15, and C18 Tier 4 Interim Engines Ether Starting Aid - Test
793F Off-Highway Truck Machine Systems Relief Valve (Brake Oil Cooling) - Remove and Install
793F AC, 795F AC, and 795F AC XQ Off-Highway Trucks Monitoring System Diagnostic Code List
584 and 584HD Forwarders Engine Supplement Aftercooler - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.