Fan Drive - Remove and Install
拆卸步骤
开始:
- 拆下风扇。 请参阅拆解和组装, "风扇 - 拆卸和安装"。
- 拆下风扇驱动皮带轮的皮带。 参考操作和保养手册, "皮带 - 检查/调整/更换"。
- 拆下皮带轮 (1) 。
Show/hide table
图 1 | g01237271 |
- 拆下螺栓 (2 ) 。 卸下风扇驱动 (3) 。
Show/hide table
图 2 | g01115052 |
- 拆下螺栓 (4) 。 拆下板 (5) 。
Show/hide table
图 3 | g01115054 |
安装步骤
- 安装板 (5) 。 安装螺栓 (4) 。
Show/hide table
图 4 | g01115054 |
- 安装风扇驱动 (3) 。 安装螺栓 (2) 。
Show/hide table
图 5 | g01115052 |
- 安装皮带轮 (1) 。
Show/hide table
图 6 | g01115049 |
- 安装风扇驱动皮带轮的皮带。 参考操作和保养手册, "皮带 - 检查/调整/更换"。
End By: 安装风扇。 请参阅 拆解和组装, "风扇 - 拆卸和安装"。
Caterpillar Information System:
CD54 Vibratory Compactor Machine Systems System Pressure - Release
795F AC and 795F AC XQ Off-Highway Trucks Prepare the Machine for Maintenance
2009/12/24 A New Design for the Secondary Steering Relay is Now Used on Some M-Series Motor Graders {1408, 4344, 7499}
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Power Train Electronic Control System Switch Circuits
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Power Train Electronic Control System MID 027 - CID 3210 - FMI 06
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Power Train Electronic Control System MID 027 - CID 3210 - FMI 05
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Power Train Electronic Control System MID 027 - CID 3210 - FMI 03
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Power Train Electronic Control System MID 027 - CID 2304 - FMI 06
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Power Train Electronic Control System MID 027 - CID 2304 - FMI 05
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Power Train Electronic Control System MID 027 - CID 2304 - FMI 03
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Power Train Electronic Control System MID 027 - CID 2252 - FMI 14
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Power Train Electronic Control System MID 027 - CID 2252 - FMI 08
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Engine Supplement Turbocharger - Remove and Install
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Engine Supplement Fuel Priming Pump and Primary Filter (Water Separator) - Remove and Install
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Engine Supplement Radiator, Refrig Condenser, and Hyd and TMSN Oil Cooler - Install
2010/01/21 A New Story Has Been Added to Disassembly and Assembly Manuals for certain Skid Steer Loaders and Multi Terrain Loaders {1122, 6459}
Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561} Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561}
Supplemental Parts Information for the USN Seabee 815F Series 2 Soil Compactor{7000} Supplemental Parts Information for the USN Seabee 815F Series 2 Soil Compactor{7000}
2009/12/17 Hex Systems With CAES Can Now Utilize a Combination of Various Angle Sensors {1439, 7858}
793F Off-Highway Truck Machine Systems Rear Suspension - Remove and Install
2010/01/06 A New Retaining Pin Should Be Used When the Master Link is Reassembled on the RM-500 Road Reclaimer/Soil Stabilizer {5631}
A Replacement Procedure for the A/C Hose on Certain Motor Graders is Now Available{1808, 7320} A Replacement Procedure for the A/C Hose on Certain Motor Graders is Now Available{1808, 7320}
2009/12/23 A New Procedure in Order to Replace the Tube Assembly on the Frame of the 797 and the 797B Off-Highway Truck is Now Available {7051, 7960}
793F Off-Highway Truck Machine Systems Solenoid Valve (Automatic Lubrication) - Remove and Install