System Pressure - Release
Release Procedure
Show/hide table
 |
Personal injury can result from hydraulic oil pressure and hot oil. Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system. Make sure all of the attachments have been lowered, oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand. |
 |
- Shut off the engine.
- Apply the parking brake.
- Slowly loosen the filler cap in order to release the pressure.
- Tighten the filler cap.
- The pressure in the hydraulic system has been released. Lines and components can be released.
Caterpillar Information System:
795F AC and 795F AC XQ Off-Highway Trucks Prepare the Machine for Maintenance
2009/12/24 A New Design for the Secondary Steering Relay is Now Used on Some M-Series Motor Graders {1408, 4344, 7499}
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Power Train Electronic Control System Switch Circuits
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Power Train Electronic Control System MID 027 - CID 3210 - FMI 06
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Power Train Electronic Control System MID 027 - CID 3210 - FMI 05
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Power Train Electronic Control System MID 027 - CID 3210 - FMI 03
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Power Train Electronic Control System MID 027 - CID 2304 - FMI 06
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Power Train Electronic Control System MID 027 - CID 2304 - FMI 05
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Power Train Electronic Control System MID 027 - CID 2304 - FMI 03
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Power Train Electronic Control System MID 027 - CID 2252 - FMI 14
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Power Train Electronic Control System MID 027 - CID 2252 - FMI 08
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Power Train Electronic Control System MID 027 - CID 2252 - FMI 04
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Engine Supplement Fan Drive - Remove and Install
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Engine Supplement Turbocharger - Remove and Install
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Engine Supplement Fuel Priming Pump and Primary Filter (Water Separator) - Remove and Install
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Engine Supplement Radiator, Refrig Condenser, and Hyd and TMSN Oil Cooler - Install
2010/01/21 A New Story Has Been Added to Disassembly and Assembly Manuals for certain Skid Steer Loaders and Multi Terrain Loaders {1122, 6459}
Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561} Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561}
Supplemental Parts Information for the USN Seabee 815F Series 2 Soil Compactor{7000} Supplemental Parts Information for the USN Seabee 815F Series 2 Soil Compactor{7000}
2009/12/17 Hex Systems With CAES Can Now Utilize a Combination of Various Angle Sensors {1439, 7858}
793F Off-Highway Truck Machine Systems Rear Suspension - Remove and Install
2010/01/06 A New Retaining Pin Should Be Used When the Master Link is Reassembled on the RM-500 Road Reclaimer/Soil Stabilizer {5631}
A Replacement Procedure for the A/C Hose on Certain Motor Graders is Now Available{1808, 7320} A Replacement Procedure for the A/C Hose on Certain Motor Graders is Now Available{1808, 7320}
2009/12/23 A New Procedure in Order to Replace the Tube Assembly on the Frame of the 797 and the 797B Off-Highway Truck is Now Available {7051, 7960}