Caterpillar Electronic Locomotive Control System II Caterpillar


Problem Number 8 Personality Module Fault

Usage:

STEP 1. Check Personality Module

Test Procedure:

Verify that Personality Module is firmly and properly attached to the Locomotive Control box lid. (See Installation Guide 7.)

Expected Results:

Personality Module is properly connected.

Caterpillar Information System:

Caterpillar Electronic Locomotive Control System II Problem Number 7 Cab Mounted Warning Light Turns On
Caterpillar Electronic Locomotive Control System II Problem Number 6 Engine Speed Not Constant
Caterpillar Electronic Locomotive Control System II Problem Number 5 Engine Will Not Respond To Throttle
Caterpillar Electronic Locomotive Control System II Problem Number 4 Generator Power Is Incorrect In One Or More Notches
Caterpillar Electronic Locomotive Control System II Problem Number 3 Engine Will Not Carry Load Or Loads Erratically
Caterpillar Electronic Locomotive Control System II Problem Number 2 Engine Will Not Start
Caterpillar Electronic Locomotive Control System II Problem Number 1 Fuel Linkage Has Limited Travel, Binds Or Takes Excessive Force
Caterpillar Electronic Locomotive Control System II Introduction
Caterpillar Electronic Locomotive Control System II Problist
Caterpillar Electronic Locomotive Control System II 13. System Checkout And Adjustment
Caterpillar Electronic Locomotive Control System II 12. Personality Module Replacement/Installation
Caterpillar Electronic Locomotive Control System II 11. Electrical Interface Guide
Caterpillar Electronic Locomotive Control System II Problem Number 9 Engine Speed Sensor Fault
Caterpillar Electronic Locomotive Control System II Problem Number 10 Rack Position Sensor Fault
Caterpillar Electronic Locomotive Control System II Problem Number 13 Engine Overspeeds
Caterpillar Electronic Locomotive Control System II Problem Number 14 Generator Load Lamp Is On
Caterpillar Electronic Locomotive Control System II Problem Number 15 Shutdown Lamp Is On
Caterpillar Electronic Locomotive Control System II Problem Number 16 Wheel Slip Lamp Is On
Caterpillar Electronic Locomotive Control System II Problem Number 17 Box Fault Lamp Is On
Caterpillar Electronic Locomotive Control System II Problem Number 18 Engine Shuts Down
Caterpillar Electronic Locomotive Control System II Testing And Adjusting
Caterpillar Electronic Locomotive Control System II 1. Mounting Plate Assembly
Caterpillar Electronic Locomotive Control System II 2. Input-Output Connections
Caterpillar Electronic Locomotive Control System II 3 Locomotive Electrical System Modification
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.