Transformer Assembly
Usage:
Remove & Install Transformer Assembly
1. Identify and disconnect wire (1).
2. Mark wire connections (3) and disconnect.
3. Remove two bolts (2) and remove the transformer.
4. To remove the transformer assembly as a unit mark all wire connections (1) and (3). Disconnect wires (1) and (3).
5. Remove two harness clamps (5). Remove two nuts washers and spacers (4) and remove the transformer assembly.
NOTE: For installation of the transformers, reverse the removal steps.
Caterpillar Information System:
3406 SPARK IGNITED ENGINE Aftercooler
3406 SPARK IGNITED ENGINE Oil Filter Base
3406 SPARK IGNITED ENGINE Oil Cooler
3406 SPARK IGNITED ENGINE Magnetic Pick-up
3406 SPARK IGNITED ENGINE Intake Manifold
SUPPLEMENT FOR 3114, 3116 & 3126 - INDUSTRIAL ENGINES ENGINES EQUIPPED WIT Testing And Adjusting
SUPPLEMENT FOR 3114, 3116 & 3126 - INDUSTRIAL ENGINES ENGINES EQUIPPED WIT Systems Operation
SUPPLEMENT FOR 3114, 3116 & 3126 - INDUSTRIAL ENGINES ENGINES EQUIPPED WIT Starting Motor
SUPPLEMENT FOR 3114, 3116 & 3126 - INDUSTRIAL ENGINES ENGINES EQUIPPED WIT Alternator and Regulator
SUPPLEMENT FOR 3114, 3116 & 3126 - INDUSTRIAL ENGINES ENGINES EQUIPPED WIT Vernier Control Cable Assembly
SUPPLEMENT FOR 3114, 3116 & 3126 - INDUSTRIAL ENGINES ENGINES EQUIPPED WIT Start Switch
SUPPLEMENT FOR 3114, 3116 & 3126 - INDUSTRIAL ENGINES ENGINES EQUIPPED WIT Junction Box
3406 SPARK IGNITED ENGINE Spark Plug Adapter
3406 SPARK IGNITED ENGINE Water Temperature Regulator
3406 SPARK IGNITED ENGINE Magneto
3406 SPARK IGNITED ENGINE Overspeed Shutoff
3406 SPARK IGNITED ENGINE Governor Drive Group
3406 SPARK IGNITED ENGINE Exhaust Bypass Valve
3406 SPARK IGNITED ENGINE Turbocharger
3406 SPARK IGNITED ENGINE Gas Pressure Regulator Assembly
3406 SPARK IGNITED ENGINE Water Pump
3406 SPARK IGNITED ENGINE Auxiliary Water Pump
3406 SPARK IGNITED ENGINE Carburetor (High Pressure Gas)
3406 SPARK IGNITED ENGINE Carburetor (Low Pressure Gas)