Springs (Control Valves)
Show/hide table
| 零件号 | 首次测试长度 mm（in） |
首次测试力 N（lb） |
第二次测试长度 mm（in） |
第二次测试力 N（lb） |
自由长度 mm（in） |
外径 mm（in） |
| 284-3555 | 28.5 mm (1.12 in) |
261 ± 21 N (58.7 ± 4.7 lb) |
24.0 mm (0.95 in) |
666 ± 53 N149 (.7 ± 11.9 lb) |
31.4 mm (1.24 in) |
19.36 mm (0.762 in) |
| 284-3556 | 44 mm (1.73 in) |
177 ± 15 N (39.8 ± 3.4 lb) |
35.00 mm (1.378 in) |
609 ± 48 N (136.9 ± 10.8 lb) |
47.69 mm (1.878 in) |
19.36 mm (0.762 in) |
| 212-4961 | 23.9 mm (0.94 in) |
14.25 ± 21 N (3.205 ± 4.721 lb) |
N/A | N/A | 27.24 mm (1.072 in) |
7.5 mm (0.30 in) |
| 6E-3007 | 8.60 mm (0.339 in) |
0.234 ± 0.024 N (0.053 ± 0.005 lb) |
N/A | N/A | 10.0 mm (0.39 in) |
4.6 mm (0.18 in) |
Caterpillar Information System:
279C, 279C2, 289C, 289C2 and 299C Compact Track Loaders, 287C, 277C, 277C2, 287C2 and 297C Multi Terrain Loaders and 246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Electronic Control System Using the Operator Monitor to Determine Diagnostic Codes
279C, 279C2, 289C, 289C2 and 299C Compact Track Loaders, 287C, 277C, 277C2, 287C2 and 297C Multi Terrain Loaders and 246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Electronic Control System Using Caterpillar Electronic Technician to Determine Diagnostic Codes
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 0168 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 0168 - FMI 01
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 0168 - FMI 00
740 ; 740 EJECTOR Articulated Trucks - Preload of the Bearing for the Output Yoke that Is not to Specification may Result in Inconsistent Output Speed of the Transmission{3160, 3175, 3253, 7493} 740 & 740 EJECTOR Articulated Trucks - Preload of the Bearing for the Output Yoke that Is not to Specification may Result in Inconsistent Output Speed of the Transmission{3160, 3175, 3253, 7493}
966H and 972H Wheel Loaders Power Train Speed Sensor (Torque Converter Output) (Transmission Output)
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Steering Control Valve - Disassemble
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Steering Control Valve - Assemble
Installation Instructions for the 282-9956 Cushion Swing Conversion Ar (Kit){5057, 5105, 5454} Installation Instructions for the 282-9956 Cushion Swing Conversion Ar (Kit){5057, 5105, 5454}
AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope) MID 114 - CID 0248 - FMI 12
AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope) MID 114 - CID 0248 - FMI 09
277C, 287C and 297C Multi Terrain Loaders Sprocket Sleeve - Inspect
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Secondary Steering System Electric Drive Pump (Secondary Steering)
279C, 279C2, 289C, 289C2 and 299C Compact Track Loaders, 287C, 277C, 277C2, 287C2 and 297C Multi Terrain Loaders and 246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Electronic Control System Data Link
AccuGrade® GPS Safety Messages
C15 Petroleum Generator Set Engines Valve Mechanism
572R Series II Pipelayer Transmission Clutch Pressure - Test
AS2302 Vers-A-Mat Screed Manual Adjuster (Screed Plate Angle) - Remove and Install
AccuGrade® Site Reference System (SRS) and Laser Reference System (LRS) Display (Laser Reference System)
2006/08/07 New Fuel Line is Now Used {1274}
R1700G Load Haul Dump Payload Control System (PCS) - If Equipped
R1700G Load Haul Dump Hydraulic System Pilot Hydraulic System
2006/09/04 New Differentials Are Used {3256, 3278}