Valve Mechanism
Show/hide table
图 1 | g02539656 |
(1) 摇臂
(3) 调整螺钉 (5) 凸轮轴 (7) 气门桥 |
Show/hide table
190-0009 燃油泵和气门机构、 224-5136 燃油泵和气门机构和 235-0382 燃油泵和气门机构的技术规格 | |||
项目 | 数量 | 零件 | 技术规格说明 |
2 | 1 | 276-5317 螺母 | 螺母的扭矩为 |
4 | 1 | 307-8322 摇臂轴组件 | 新摇臂轴组件的直径为 |
摇臂中用于安装摇臂轴的孔径为 |
|||
6 | - | - | 气门间隙设置:
进气门为 排气门为 |
对于配备可变气门执行器的发动机,参考技术规格, "可变气门执行器"以了解有关摇臂组件安装的信息。 | |||
对于配备 CAT 压缩制动器的发动机,参考技术规格, "CAT 压缩制动器"以了解正确的摇臂组件安装步骤。 |
Caterpillar Information System:
AccuGrade® GPS Safety Messages
279C, 279C2, 289C, 289C2 and 299C Compact Track Loaders, 287C, 277C, 277C2, 287C2 and 297C Multi Terrain Loaders and 246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Electronic Control System Data Link
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Secondary Steering System Electric Drive Pump (Secondary Steering)
277C, 287C and 297C Multi Terrain Loaders Sprocket Sleeve - Inspect
14M and 16M Motor Graders Hydraulic and Steering System Springs (Control Valves)
279C, 279C2, 289C, 289C2 and 299C Compact Track Loaders, 287C, 277C, 277C2, 287C2 and 297C Multi Terrain Loaders and 246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Electronic Control System Using the Operator Monitor to Determine Diagnostic Codes
279C, 279C2, 289C, 289C2 and 299C Compact Track Loaders, 287C, 277C, 277C2, 287C2 and 297C Multi Terrain Loaders and 246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Electronic Control System Using Caterpillar Electronic Technician to Determine Diagnostic Codes
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 0168 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 0168 - FMI 01
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 0168 - FMI 00
740 ; 740 EJECTOR Articulated Trucks - Preload of the Bearing for the Output Yoke that Is not to Specification may Result in Inconsistent Output Speed of the Transmission{3160, 3175, 3253, 7493} 740 & 740 EJECTOR Articulated Trucks - Preload of the Bearing for the Output Yoke that Is not to Specification may Result in Inconsistent Output Speed of the Transmission{3160, 3175, 3253, 7493}
966H and 972H Wheel Loaders Power Train Speed Sensor (Torque Converter Output) (Transmission Output)
572R Series II Pipelayer Transmission Clutch Pressure - Test
AS2302 Vers-A-Mat Screed Manual Adjuster (Screed Plate Angle) - Remove and Install
AccuGrade® Site Reference System (SRS) and Laser Reference System (LRS) Display (Laser Reference System)
2006/08/07 New Fuel Line is Now Used {1274}
R1700G Load Haul Dump Payload Control System (PCS) - If Equipped
R1700G Load Haul Dump Hydraulic System Pilot Hydraulic System
2006/09/04 New Differentials Are Used {3256, 3278}
12M, 140M and 160M Motor Graders Hydraulic and Steering System Hydraulic Tank Mounting
793D Off-Highway Truck/Tractor Front Suspension (Cylinder) - Disassemble
793D Off-Highway Truck/Tractor Front Suspension (Cylinder) - Assemble
Filtration Procedure for Off-Highway Truck (769-777) Rear Axle Oil {0680, 0768, 3260, 4050} Filtration Procedure for Off-Highway Truck (769-777) Rear Axle Oil {0680, 0768, 3260, 4050}
3176C Engines for Caterpillar Built Machines Digital Sensor Supply Circuit - Test