795F AC and 795F AC XQ Off-Highway Truck Machine Systems Caterpillar


Steering Control Valve - Disassemble

Usage:

795F AC ERM

拆解步骤

开始:

  1. 卸下转向控制阀。 请参阅拆解和组装, "转向控制阀 - 拆卸",以了解正确的步骤。


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损和缩短部件寿命。





    图 1g01284638

  1. 拆下螺塞 (1) 。 拆下节流孔 (2) 。



    图 2g01284650

    ------ WARNING! ------

    被弹簧力爆出的零件击中,会招致人员伤害。

    确保穿上所有必要的保护装备。

    遵照建议的程序,并使用所有建议的工具以释放弹簧力。


  1. 拆下塞 (5) 、阀 (4) 和弹簧 (3) 。

  1. 拆下塞 (8) 、塞 (7) 和 O 形密封圈 (6) 。



    图 3g01284652

  1. 拆下螺栓 (9) 。



    图 4g01284668

    ------ WARNING! ------

    被弹簧力爆出的零件击中,会招致人员伤害。

    确保穿上所有必要的保护装备。

    遵照建议的程序,并使用所有建议的工具以释放弹簧力。


  1. 均匀地拧松螺栓 (10) ,直到弹簧张力释放。 拆下螺栓 (10) 。 拆下盖 (11) 。

    注: 为便于组装,标记盖的对准位置。




    图 5g01284681

  1. 拆下 O 形密封圈 (12) 、止动块 (13) 、O 形密封圈 (14) 、O 形密封圈 (15) 、O 形密封圈 (16) 和止动块 (17) 。



    图 6g01284688

  1. 拆下弹簧 (20) 、弹簧 (19) 和导向器 (18) 。

  1. 拆下弹簧 (21) 。



    图 7g01284731

  1. 拆下螺栓 (22) 。



    图 8g01284737

    ------ WARNING! ------

    被弹簧力爆出的零件击中,会招致人员伤害。

    确保穿上所有必要的保护装备。

    遵照建议的程序,并使用所有建议的工具以释放弹簧力。


  1. 均匀地拧松螺栓 (23) ,直到弹簧张力释放。 拆下螺栓 (23) 。 拆下盖 (24) 。

    注: 为便于组装,标记盖的对准位置。




    图 9g01284759

  1. 拆下 O 形密封圈 (25) 、O 形密封圈 (26) 、O 形密封圈 (27) 、O 形密封圈 (28) 、O 形密封圈 (29) 、止动块 (30) 和 O 形密封圈 (31) 。



    图 10g01284813

  1. 拆下弹簧 (34) 、弹簧 (33) 和导向器 (32) 。

  1. 拆下弹簧 (35) 。



    图 11g01284815

  1. 拆下节流孔 (36) 。

  1. 拆下滑阀 (37) 。



    图 12g01284817

  1. 从滑阀 (37) 上拆下节流孔 (38) 。

  1. 重复步骤 16 以从滑阀 (37) 的相反一端拆下节流孔 (38) 。



    图 13g01284820

  1. 拆下阀 (39) 。



    图 14g01284824

  1. 将 O 形密封圈 (40) 从阀 (39) 上拆下。



    图 15g01284826

  1. 拆下滑阀 (41) 。



    图 16g01284833

    ------ WARNING! ------

    被弹簧力爆出的零件击中,会招致人员伤害。

    确保穿上所有必要的保护装备。

    遵照建议的程序,并使用所有建议的工具以释放弹簧力。


  1. 卸下挡圈 (42) 。 拆下销 (45) 。 拆下螺塞 (43) 。 拆下弹簧 (44) 。



    图 17g01284830

  1. 从螺塞 (43) 上拆下节流孔 (46) 。



    图 18g01284839

  1. 拆下挡圈 (47) 。



    图 19g01284841

  1. 拆下销 (48) 。 拆下滑阀 (49) 。



    图 20g01284846

  1. 拆下单向阀 (50) 。



    图 21g01284916

  1. 拆下 O 型密封圈 (51) 。



    图 22g01284919

  1. 拆下滑阀 (52) 。



    图 23g01284922

  1. 拆下节流孔 (53) 。



    图 24g01284978

  1. 拆下阀 (54) 。



    图 25g01284939

  1. 将 O 形密封圈 (55) 从阀 (54) 上拆下。

Caterpillar Information System:

795F AC and 795F AC XQ Off-Highway Truck Machine Systems Steering Control Valve - Assemble
Installation Instructions for the 282-9956 Cushion Swing Conversion Ar (Kit){5057, 5105, 5454} Installation Instructions for the 282-9956 Cushion Swing Conversion Ar (Kit){5057, 5105, 5454}
AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope) MID 114 - CID 0248 - FMI 12
AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope) MID 114 - CID 0248 - FMI 09
AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope) MID 114 - CID 0248 - FMI 02
AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope) MID 114 - CID 0168 - FMI 04
700 Family Articulated Trucks - Correct Installation of Keeper Pins for Securing the Mounting Pins for the Cab{7266} 700 Family Articulated Trucks - Correct Installation of Keeper Pins for Securing the Mounting Pins for the Cab{7266}
AccuGrade® GPS Using The CD550A Display (GPS/ATS/Sonic/Cross Slope) MID 114 - CID 0168 - FMI 03
279C, 279C2, 289C, 289C2 and 299C Compact Track Loaders, 287C, 277C, 277C2, 287C2 and 297C Multi Terrain Loaders and 246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Electronic Control System Diagnostic Code List
279C, 279C2, 289C, 289C2 and 299C Compact Track Loaders, 287C, 277C, 277C2, 287C2 and 297C Multi Terrain Loaders and 246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Electronic Control System Event Code List
279C, 279C2, 289C, 289C2 and 299C Compact Track Loaders, 287C, 277C, 277C2, 287C2 and 297C Multi Terrain Loaders and 246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Electronic Control System Diagnostic Capabilities
279C, 279C2, 289C, 289C2 and 299C Compact Track Loaders, 287C, 277C, 277C2, 287C2 and 297C Multi Terrain Loaders and 246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Electronic Control System Connector Locations
966H and 972H Wheel Loaders Power Train Speed Sensor (Torque Converter Output) (Transmission Output)
740 ; 740 EJECTOR Articulated Trucks - Preload of the Bearing for the Output Yoke that Is not to Specification may Result in Inconsistent Output Speed of the Transmission{3160, 3175, 3253, 7493} 740 & 740 EJECTOR Articulated Trucks - Preload of the Bearing for the Output Yoke that Is not to Specification may Result in Inconsistent Output Speed of the Transmission{3160, 3175, 3253, 7493}
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 0168 - FMI 00
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 0168 - FMI 01
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 0168 - FMI 02
279C, 279C2, 289C, 289C2 and 299C Compact Track Loaders, 287C, 277C, 277C2, 287C2 and 297C Multi Terrain Loaders and 246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Electronic Control System Using Caterpillar Electronic Technician to Determine Diagnostic Codes
279C, 279C2, 289C, 289C2 and 299C Compact Track Loaders, 287C, 277C, 277C2, 287C2 and 297C Multi Terrain Loaders and 246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Electronic Control System Using the Operator Monitor to Determine Diagnostic Codes
14M and 16M Motor Graders Hydraulic and Steering System Springs (Control Valves)
277C, 287C and 297C Multi Terrain Loaders Sprocket Sleeve - Inspect
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Secondary Steering System Electric Drive Pump (Secondary Steering)
279C, 279C2, 289C, 289C2 and 299C Compact Track Loaders, 287C, 277C, 277C2, 287C2 and 297C Multi Terrain Loaders and 246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Electronic Control System Data Link
AccuGrade® GPS Safety Messages
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.