Data Link
The Cat Data Link enables all of the electronic control modules on the machine to communicate with each other. The Cat Data Link is bi-directional, allowing the ECMs to send information and receive information.
The Cat Data Link plus connection for the machine ECM is on contact J1-10 through wire 893-GN. The Cat Data Link minus connection for the machine ECM is on contact J1-20 through wire 892-BR.
Caterpillar Electronic Technician (ET) communicates with the ECM modules through the Cat Data Link.
The CAN data link is an input and an output of the ECM. The CAN data link is connected to the ECM at contacts J2-56, J2-67, J2-68 and J2-70. The data link is designed to communicate with other electronic control modules through the machine harness.
Caterpillar Information System:
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Secondary Steering System Electric Drive Pump (Secondary Steering)
277C, 287C and 297C Multi Terrain Loaders Sprocket Sleeve - Inspect
14M and 16M Motor Graders Hydraulic and Steering System Springs (Control Valves)
279C, 279C2, 289C, 289C2 and 299C Compact Track Loaders, 287C, 277C, 277C2, 287C2 and 297C Multi Terrain Loaders and 246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Electronic Control System Using the Operator Monitor to Determine Diagnostic Codes
279C, 279C2, 289C, 289C2 and 299C Compact Track Loaders, 287C, 277C, 277C2, 287C2 and 297C Multi Terrain Loaders and 246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Electronic Control System Using Caterpillar Electronic Technician to Determine Diagnostic Codes
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 0168 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 0168 - FMI 01
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System MID 082 - CID 0168 - FMI 00
740 ; 740 EJECTOR Articulated Trucks - Preload of the Bearing for the Output Yoke that Is not to Specification may Result in Inconsistent Output Speed of the Transmission{3160, 3175, 3253, 7493} 740 & 740 EJECTOR Articulated Trucks - Preload of the Bearing for the Output Yoke that Is not to Specification may Result in Inconsistent Output Speed of the Transmission{3160, 3175, 3253, 7493}
966H and 972H Wheel Loaders Power Train Speed Sensor (Torque Converter Output) (Transmission Output)
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Steering Control Valve - Disassemble
795F AC and 795F AC XQ Off-Highway Truck Machine Systems Steering Control Valve - Assemble
AccuGrade® GPS Safety Messages
C15 Petroleum Generator Set Engines Valve Mechanism
572R Series II Pipelayer Transmission Clutch Pressure - Test
AS2302 Vers-A-Mat Screed Manual Adjuster (Screed Plate Angle) - Remove and Install
AccuGrade® Site Reference System (SRS) and Laser Reference System (LRS) Display (Laser Reference System)
2006/08/07 New Fuel Line is Now Used {1274}
R1700G Load Haul Dump Payload Control System (PCS) - If Equipped
R1700G Load Haul Dump Hydraulic System Pilot Hydraulic System
2006/09/04 New Differentials Are Used {3256, 3278}
12M, 140M and 160M Motor Graders Hydraulic and Steering System Hydraulic Tank Mounting
793D Off-Highway Truck/Tractor Front Suspension (Cylinder) - Disassemble
793D Off-Highway Truck/Tractor Front Suspension (Cylinder) - Assemble