568 Forest Machine Machine System Specifications Caterpillar


Front Idler

Usage:

568 FM LL BRB



图 1g01436088

(1) 从前引导轮组件上拆下管塞 (4) ,并施加空气压力到此端口。 前引导轮组件应该保持 245 kPa (36 psi) 到 265 kPa (38 psi) 的气压至少 30 秒钟。 添加 0.600 ± 0.030 L (0.159 ± 0.008 US gal) 的 SAE 30-CD 机油。 在管螺塞的螺纹上涂抹 4C-4030 螺纹固定剂 并安装管螺塞。

(2) 组装时,橡胶曲面密封和所有接触面必须清洁干燥。 组装之前,在金属密封环的接触面上涂一薄层 6V-4876 润滑剂 。 密封圈必须装配成方形。 橡胶曲面密封不能膨胀也不能扭歪。

(3) 使用润滑剂润滑要密封的 O 形密封圈。

(4) 组装前,表面必须清洁,且没有防护涂层。

(5) 安装惰轮轴 将压印在惰轮轴端面的 "R" 标记向后定位至前惰轮轴承内。




图 2g01436084

B-B 视图

注: 安装销,使狭缝在指定的范围内。 有关销的正确位置,请参阅插图 2。

(C) 技术参数范围 ... 40 度

(D) 轴中心线的角度 ... 20 度

轴向间隙:

最低 ... 0.26 mm (0.010 in)
最高 ... 1.26 mm (0.050 in)

Caterpillar Information System:

2006/06/26 An Improved Hose Routing for the Heater and Air Conditioner is Now Available on Reclaimer Mixers {1808, 1812}
279C, 279C2, 289C, 289C2 and 299C Compact Track Loaders, 287C, 277C, 277C2, 287C2 and 297C Multi Terrain Loaders and 246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Electronic Control System Calibration
C6.6 Engines for Caterpillar Built Machines Fuel Priming Pump
AQUILATM DrillWizard Configuration
572R Series II Pipelayer Priority Valve - Test and Adjust
AQUILATM DrillWizard Installation
3176C Engines for Caterpillar Built Machines System Overview
AQUILATM DrillWizard General Information
C175-16 Locomotive Engine Engine Speed Sensor
2006/06/26 A New Speed-Timing Sensor is Available {1912}
2006/07/03 An Improved Link is Now available {5102, 6119}
C4.4 Industrial Engine Compression - Test
R1700G Load Haul Dump Fire Suppression System (Dry Powder) - If Equipped
2006/09/11 Adjustment Procedure for the Extendable Stick Wear Pads {6533}
2006/08/21 New Procedure for Installing Window Seals {7301, 7310}
C4.4 Industrial Engine Piston Height - Inspect
2006/08/07 New Procedure for Measuring the Connecting Rod {1218, 1225}
2006/08/14 New Procedure for Measuring the Connecting Rod {1218, 1225}
AccuGrade® Site Reference System (SRS) and Laser Reference System (LRS) Startup (Site Reference System)
770, 772, 773E, 773F, 777E and 777F Off-Highway Trucks and 775F Quarry Truck VIMS Truck Payload System General Information
AccuGrade® Site Reference System (SRS) and Laser Reference System (LRS) Shutdown (Site Reference System)
RM-300 Reclaimer Mixer Machine Systems Rotor Drive Differential - Disassemble
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System Wiring Harness (Short Circuit) - Test
Inspection and Testing of the Air Shutoff{1078} Inspection and Testing of the Air Shutoff{1078}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.