2006/06/26 Caterpillar


An Improved Hose Routing for the Heater and Air Conditioner is Now Available on Reclaimer Mixers {1808, 1812}

Usage:

RM-300 BWR
Reclaimer Mixer:
RM-300 (S/N: BWR1-UP)

The routing of hose assemblies has been improved. The new hose routing provides increased clearance with the exhaust manifold.




    Illustration 1g01282945



    Illustration 2g01282949

  1. Route the hose assembly for the air conditioner through position (1) on the clamp assembly.

  1. Route the hose assembly for the air conditioner through position (3) on the clamp assembly.

  1. Route the hose assembly that connects the heater to the right side of the engine, through position (4) on the clamp assembly.

  1. Route the hose assembly that connects the heater to the rear of the engine, through position (5) on the clamp assembly.

  1. Position (2) of the clamp assembly is left empty.

  1. Adjust the hose assemblies in order to obtain a 76 mm (3 inch) clearance away from the exhaust manifold.

Caterpillar Information System:

279C, 279C2, 289C, 289C2 and 299C Compact Track Loaders, 287C, 277C, 277C2, 287C2 and 297C Multi Terrain Loaders and 246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Machine Electronic Control System Calibration
C6.6 Engines for Caterpillar Built Machines Fuel Priming Pump
AQUILATM DrillWizard Configuration
572R Series II Pipelayer Priority Valve - Test and Adjust
AQUILATM DrillWizard Installation
3176C Engines for Caterpillar Built Machines System Overview
AQUILATM DrillWizard General Information
C175-16 Locomotive Engine Engine Speed Sensor
2006/06/26 A New Speed-Timing Sensor is Available {1912}
2006/07/03 An Improved Link is Now available {5102, 6119}
C4.4 Industrial Engine Compression - Test
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Sideshift Slide Lock Circuit - If Equipped
568 Forest Machine Machine System Specifications Front Idler
R1700G Load Haul Dump Fire Suppression System (Dry Powder) - If Equipped
2006/09/11 Adjustment Procedure for the Extendable Stick Wear Pads {6533}
2006/08/21 New Procedure for Installing Window Seals {7301, 7310}
C4.4 Industrial Engine Piston Height - Inspect
2006/08/07 New Procedure for Measuring the Connecting Rod {1218, 1225}
2006/08/14 New Procedure for Measuring the Connecting Rod {1218, 1225}
AccuGrade® Site Reference System (SRS) and Laser Reference System (LRS) Startup (Site Reference System)
770, 772, 773E, 773F, 777E and 777F Off-Highway Trucks and 775F Quarry Truck VIMS Truck Payload System General Information
AccuGrade® Site Reference System (SRS) and Laser Reference System (LRS) Shutdown (Site Reference System)
RM-300 Reclaimer Mixer Machine Systems Rotor Drive Differential - Disassemble
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System Wiring Harness (Short Circuit) - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.