AQUILATM DrillWizard Caterpillar

Hardware Requirements for Installation

DrillWizard requires one of the following operating environments for the hardware:

• Windows 95^®

• Windows 98^®

• Windows ME^®

• Windows NT^®

• Windows 2000^®

DrillWizard requires a maximum of 30 Megabytes of free space for the installation.

DrillWizard also requires an already established TCP/IP link to the drills in order to communicate. The link can be in the form of the following connections:

• Local wireless network

• Dial up network over a serial cable

• Other infrastructure that provides TCP/IP communication

Software Requirements for Installation

DrillWizard does not require any other software to be installed.

Requirements for Database

DrillWizard does not require any databases.

Installation Procedure

Refer to Step 1 through Step 8 in order to perform a successful installation.

Show/hide table



Illustration 1	g01282955

1. Run the setup.exe file that is in the package for setup. Refer to Illustration 1.

Show/hide table



Illustration 2	g01283122

2. If you receive a notice regarding updating files in the setup, click "OK". Refer to Illustration 2.

Show/hide table



Illustration 3	g01283181

3. If you receive a notice regarding restarting the computer, click "Yes". Refer to Illustration 3.

Show/hide table



Illustration 4	g01282955

4. If you have restarted the computer, run the setup.exe file again. Refer to Illustration 4.

Show/hide table



Illustration 5	g01283287

Show/hide table

NOTICE
Loss of data may occur if other software applications are open during installation.

5. The Setup program will display a "Welcome" message. Click on "OK". Refer to Illustration 5.

Show/hide table



Illustration 6	g01283290
(1) Icon (Computer with Disks)

6. In order to begin the installation, click on the icon (1) .

Show/hide table



Illustration 7	g01283391

7. The Setup program will display a message of "Choose Program Group". Click "Continue". Refer to Illustration 7.

Show/hide table



Illustration 8	g01283405

8. The Setup program will display "DrillWizard 1.0.1 Setup was completed successfully.". Click "OK". Refer to Illustration 8.