3044C Industrial Engine and Engines for Caterpillar Built Machines Caterpillar


Electric Starting Motor

Usage:

3044C 344



Illustration 1g01024163

The starting motor

(1) Electric starting motor

(2) Tighten the nut on the starting motor terminal to the following torque. ... 18 to 25 N·m (13.3 to 18.4 lb ft)

(3) Tighten the starting motor terminal to the following torque. ... 2.6 to 4.6 N·m (23.0119 to 40.7134 lb in)

No load conditions at 25 °C (77 °F)

Speed ... 3000 rpm minimum
Current draw ... 200 amp maximum
Voltage ... 11 V

When the electric starting motor is viewed from the drive end, the motor rotates in the following direction. ... Clockwise

Caterpillar Information System:

3044C Industrial Engine and Engines for Caterpillar Built Machines Alternator and Regulator
3046 Engine for Caterpillar Built Machines Belt Tension Chart
2003/08/01 New Hose Improves the Drainage of Oil from the Turbocharger During a Continuous Prelube Cycle {1052}
2003/08/18 New Sleeve Bearings in the Oscillating Axle Trunnion Support Improve Service Life {3268, 7551}
TH220B and TH330B Telehandlers Machine Systems Bank Valve (Implement) - Assemble
740 EJECTOR Articulated Truck Ejector, Steering, Suspension, and Fan Drive Systems Secondary Steering System
Circuit Breaker Harness Assembly {1420} Circuit Breaker Harness Assembly {1420}
CP-533E and CS-533E Vibratory Soil Compactors Machine Systems Final Drive Planetary (Drum Propel) - Remove
TH220B and TH330B Telehandlers Machine Systems Bank Valve (Implement) - Disassemble
CP-533E and CS-533E Vibratory Soil Compactors Machine Systems Piston Motor (Drum Propel) - Install
776D and 777D Off-Highway Truck/Tractors Hydraulic System Electronic Control (Body Down or Up Switch)
CP-323C and CS-323C Paving Compactors Hydraulic System Oil Level - Check
C27 and C32 Generator Set Engines Camshaft Bearings - Remove
AP-655C and BG-2255C Asphalt Pavers Machine Systems Piston Pump (Hydraulic Generator) - Disassemble
C27 and C32 Generator Set Engines Camshaft Bearings - Install
AP-655C and BG-2255C Asphalt Pavers Machine Systems Piston Pump (Hydraulic Generator) - Assemble
2003/08/04 Correction to the Service Manual , "Pressure Limiter Valve - Test and Adjust " {5069, 5070, 5117}
TH350B, TH355B, TH360B and TH460B Telehandlers Operator Controls - Side Console
R2900G Load Haul Dump Steering System Articulated Hitch
R1600G Load Haul Dump Braking System Service and Parking Brake
2003/07/28 Recommended Limits to the Difference in Tire Diameters {4203}
TH220B, TH330B and TH340B Telehandlers Machine Systems Drive and Steering Axle (Rear)
Machine Security System (MSS) Integrated Time - Set
2003/07/28 Addition to Operation and Maintenance Manual , "Differential Lock" {3264}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.