 | |
| Illustration 1 | g01006928 |
(1) Hoist cylinder (2) Manifold (3) Tailgate cylinder (if equipped) (4) Counterbalance valve (if equipped) (5) Check valve (6) Lowering control valve AWR1-271 (7) Gear pump (8) Hoist control valve (8a) Pilot control actuator (lower) (8b) Pilot control actuator (raise) (9) Lowering control valve (stopped engine) (10) Relief valve (11) Valve body (A) Hydraulic tank for the hoist and braking systems (B) Hydraulic tank for the steering and fan drive systems (C) Steering system (G) Braking system | |
 | |
| Illustration 2 | g00985009 |
Hoist control valve (8) is located on the left side of the machine and beneath the cab.
 | |
| Illustration 3 | g00985010 |
Pilot control actuator (8b) and relief valve (10) are part of the hoist control valve.
 | |
| Illustration 4 | g00985013 |
Pilot control actuator (8a), lowering control valve (9), and valve body (11) are part of the hoist control valve.
 | |
| Illustration 5 | g00985017 |
Hoist cylinder (1) on the right side of the machine.
 | |
| Illustration 6 | g00985018 |
Manifold (2) is located on the front of the rear frame.
 | |
| Illustration 7 | g00985019 |
Tailgate cylinder (3) (if equipped) and counterbalance valve (4) (if equipped) are located at the rear of the machine.
 | |
| Illustration 8 | g00985020 |
(S/N: AWR1-271) and (S/N: AXM1-491) | |
Lowering control valve (6) is located on the right side of the engine and above the electric drive pump.
 | |
| Illustration 9 | g00985021 |
Check valve (5) is attached to the hoist control valve which is on the left side of the engine.
 | |
| Illustration 10 | g00985023 |
Gear pump (7) is located above the transmission. The illustration shows the gear pump on the 735. The gear pump on the 740 is located in a similar position.