Illustration 1 | g01013416 |
(1) Service brake (front) (2) Slack adjuster (front) (3) Oil cooler (4) Manifold (5) Pressure switch (stop light) (6) Accumulator (front) (7) Check and pressure reducing valve (8) Pressure switch (system pressure) (9) Accumulator (parking brake) (10) Pressure switch (parking brake) (11) Service brake (center) (12) Pressure switch (transmission) (13) Brake control valve (service) (14) Accumulator (center) (15) Brake control valve (parking) (16) Parking brake (17) Temperature sensor (18) Service brake (front) (19) Piston pump (brake) (20) Slack adjuster (center) (21) Service brake (center) (22) Temperature sensor (A) Hydraulic tank for the hoist and braking systems (D) Hoist system (F) Suspension system |
Illustration 2 | g00803558 |
Service brakes (1), (11), (18) and (21) are located on each wheel of the front and center axles.
Illustration 3 | g00803387 |
Slack adjuster (2) is located on the front axle.
Illustration 4 | g00803378 |
Stop light pressure switch (5) and transmission pressure switch (12) are located on the brake control valve on the front of the cab.
Illustration 5 | g00803383 |
Front accumulator (6) and center accumulator (14) are located beneath a panel on the right side of the cab.
Illustration 6 | g00803385 |
Check and pressure reducing valve (7) is located beneath the cab. Brake oil pressure switch (8) is installed in the check and pressure reducing valve.
Illustration 7 | g00803381 |
Service brake control valve (13) is located on the front of the cab.
Illustration 8 | g00803375 |
Brake piston pump (19) is located on the left side of the engine.
Illustration 9 | g00803388 |
Slack adjuster (20) is located on the center axle.
Illustration 10 | g00803059 |
Oil cooler (3) is located on the right side of the engine.
Illustration 11 | g00803060 |
Manifold (4) is located on the rear of the front frame and beneath the cooling fan.
Illustration 12 | g00803065 |
Temperature sensor (17) is located on the left side rear of the engine.
Illustration 13 | g00803062 |
Temperature sensor (22) is installed in a manifold on the rear frame.