TH350B, TH360B, TH460B and TH560B Telehandlers Engine Supplement Caterpillar

Removal Procedure

Start By:

1. Remove the hood. Refer to Disassembly and Assembly, "Engine Enclosure - Remove and Install".
2. Remove the air cleaner. Refer to Disassembly and Assembly, "Air Cleaner - Remove".

Show/hide table

Personal injury or death can result from improper lifting or blocking. When a hoist or jack is used to lift any part or component, stand clear of the area. Be sure the hoist or jack has the correct capacity to lift a component. Install blocks or stands before performance of any work under a heavy component. Approximate weights of the components are shown. Clean all surfaces where parts are to be installed.

Show/hide table



Illustration 1	g00984274

1. Attach a suitable lifting chain to the bracket on the engine and to a suitable hoist. Take up the tension on the chain but do not try to lift the engine at this time.

Show/hide table



Illustration 2	g00984278

Show/hide table



Illustration 3	g00984279

2. Remove bolt (1), two washers (2), nut (3), washer (4), the lower half of mount (5) and sleeve (6) .

3. Use the hoist to carefully lift the engine and the transmission until bracket (7) is just clear of the upper half of mount (5). The combined weight of the engine and the transmission is approximately 780 kg (1720 lb).

4. Remove four bolts (8) and the washers in order to remove bracket (7). Remove the upper half of mount (5) from the engine frame.