Piston Pump (Hydraulic Fan) - Install
Installation Procedure
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
- Install fan pump (10) and install bolts (11) .
Show/hide table
 | |
| Illustration 1 | g00984143 |
- Position bracket assembly (8) to the original location. Install bolts (9). Connect tube assembly (6) and hose assembly (7) .
Show/hide table
 | |
| Illustration 2 | g00984126 |
- Connect hose assemblies (5), (4), and (3). Install tube assembly (2) .
Show/hide table
 | |
| Illustration 3 | g00984123 |
- Install filter (1) .
Show/hide table
 | |
| Illustration 4 | g00984121 |
- Fill the implement hydraulic system. Refer to the appropriate Operation and Maintenance Manual for the correct procedure.
- Close the hood.
Caterpillar Information System:
735 and 740 Articulated Trucks and 735 and 740 OEM Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Hoist, Steering, Suspension, and Fan Drive System (Schematic)
735 and 740 Articulated Trucks and 735 and 740 OEM Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Braking System (Schematic)
735 and 740 Articulated Trucks and 735 and 740 OEM Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Suspension System (Schematic)
735 and 740 Articulated Trucks and 735 and 740 OEM Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Hoist System (Schematic)
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Piston Pump (Hydraulic Fan) - Remove
Procedure for Replacement of Air Conditioner Components{7320} Procedure for Replacement of Air Conditioner Components{7320}
797 Off-Highway Truck Power Train Worksheets
120H and 135H Motor Graders Operator Controls
735 and 740 Articulated Trucks and 735 and 740 OEM Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Steering System (Schematic)
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Vane Pump (Braking) - Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Loader Frame and Rear Frame - Connect
797 Off-Highway Truck Power Train Transmission - Test
3034 Engine for Caterpillar Built Machines Pistons and Connecting Rods - Remove - Fractured Connecting Rod
TH350B, TH360B, TH460B and TH560B Telehandlers Engine Supplement Engine - Install
TH210 and TH215 Telehandlers Machine Systems Diverter Valve - Remove and Install
TH210 and TH215 Telehandlers Machine Systems Trailer Brake Valve (Hydraulic) - Remove and Install
TH350B, TH360B, TH460B and TH560B Telehandlers Engine Supplement Engine Mount (Rear) - Remove
2003/03/10 Correction to Specifications, Systems Operation, Testing and Adjusting , "Transmission Control Pressure Test" {3030, 3065, 3167}
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Pilot Operated Hydraulic Control (Joystick) - Disassemble
3412 Generator Set Engines Disconnect Switch
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Pilot Operated Hydraulic Control (Joystick) - Assemble
TH350B, TH360B, TH460B and TH560B Telehandlers Engine Supplement Engine Mount (Rear) - Install
Installation and Operation of the Belt Recoil Alarm for the Mobil-trac System{4197, 7400} Installation and Operation of the Belt Recoil Alarm for the Mobil-trac System{4197, 7400}
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Selector and Pressure Control Valve (Pilot) - Remove and Install