Different Thrust Bearing And Thrust Rings Now Used In Turbochargers
Usage:
All Engines Equipped With Schwitzer Models E and F Turbochargers
Description of Change: A different thrust bearing and thrust rings are now used in the Schwitzer Models E and F Turbochargers for Caterpillar engines. The new bearing and rings are the same parts used in the Schwitzer Model 4MF Turbocharger. The new parts have larger bearing surfaces for more load capacity.
Adaptable As: The new 4N7597 Thrust Bearing and 4N7609 Thrust Rings are direct replacements for the former 8S9223 Thrust Bearing and 5S4550 Thrust Rings which have been canceled.
Caterpillar Information System:
1979/10/31 Support Plates Must Be Used To Install Earlier Marine Transmissions
1979/10/31 Use The 6V2034 Micrometer Adapter To Measure Lip Thickness Of Engine Valves
1979/10/31 Improved Seal Now Used In Seawater Pump
1979/10/24 7N9843 Fuel Injection Valve Nozzle Assembly Now Used In Truck Engines
1979/10/24 New Coolant Temperature Regulator Housing And Vent Line Valve Give Better Control Of Engine Cooling; Conversion Kits Available.
1979/10/24 Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. FActories
1979/10/24 Improved Seal Used In Raw Water Pump On Marine Engines
1979/10/24 New Camshaft Housing Gasket Has Increased Resistance To High Temperature
1979/10/24 Cold Temperature Starting Procedures For Air Compressor And Drill Engines
1979/10/24 New Hydromechanical Shut-Off Is Available
1979/10/03 New Aftercooler Core Has Stronger Construction And Corrosion Resistance
1979/10/03 Recommendation For Use Of A FLEX-HONE On 1100, 3100 and 3200 Series Engines
1979/10/31 New-3208 Engine Maintenance Tips Wall Chart
1979/10/31 Wider Connecting Rods Have More Bearing Area
1979/10/31 The FT1486 Chain Assembly Can Be Used For Emergency Repair Of Front Power Takeoff Clutches
1979/10/31 List Of Service Publications
1979/10/31 New Connecting Rod Is Tapered In Piston Pin Area
1979/11/28 Size Of Glass Beads Is Important When Used To Clean Engine And Turbocharger Parts
1979/11/28 Improvements Made To Fuel Injection Pump And Governor Group
1979/11/28 Repair Of Damaged Or Worn Balancer Shaft Bores
1979/11/28 Former Oil Pump Group Is Now Used Again
1979/11/28 Common Sense Tips For Cab-Overs
1979/11/28 New Cylinder Heads Are More Rigid And Stronger
1979/11/28 List Of Service Publications