2011/08/10 Caterpillar


An Improved Support Plate Is Now Used On Certain SW60 Wheel Saws {6712}

Usage:

SW60 WLS


Work Tool:
SW60 (S/N: WLS1-UP)

Description of Change: The hub has been improved with a forging without any weld requirements. This hub is part of the 227-8124 Wheel Saw Frame Gp .

Adaptable To: The procedure for installing an improved 227-8128 Hub is available in Special Instruction, REHS5684, "Instructions for Replacing the Support Plate on Certain SW60 Wheel Saws".

When installing the improved 227-8128 Hub, replace the parts listed in Table 1.

Table 1
Item     Qty     New Pt. No.     Part Name    
1     1     068-9932     Retaining Ring    
2     1     095-0928     Retaining Ring    
3     1     1H-6227     O-Ring Seal    
4     1     227-8126     Bearing    
5     1     227-8128     Hub    
6     1     227-8129     Shaft Seal    
Refer to Table 2 for the serial numbers that will require the change for the improved support plate.

Table 2
Adaptability & Effectivity of the Improved Support Plate    
Sales Model     Adaptability     Effectivity    
SW60     S/N:WLS1-344     S/N:WLS345-UP    

Caterpillar Information System:

H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Check Valve - Assemble
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Check Valve - Disassemble
2011/12/05 A New Valve Assembly is Now Used on Certain Excavators and Mobile Hydraulic Power Units {5057}
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Check Valve - Install
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Check Valve - Remove
301.4C Mini Hydraulic Excavator Fuel Tank Water and Sediment - Drain
VRG-20/2, VRG-25/2 and VRG-30/2 Demolition and Sorting Grapples Host Machine Pressure and Flow - Test
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators General Hazard Information
G310B, G315B and G320B Demolition and Sorting Grapples Work Tool Troubleshooting
C13, C15, and C18 Tier 4 Final Engines Fuel Manifold (ARD)
C9.3 Engines for Caterpillar Built Machines Exhaust Sensor and Lines (NRS)
330C Forest Machine Machine System Specifications Track
301.4C Mini Hydraulic Excavator Relief Valve - Test and Adjust - Pilot
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Control Valve - Disassemble
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Control Valve - Assemble
300.9D VPS Mini Hydraulic Excavator Machine Systems Hydraulic System Troubleshooting
330D and 336D Excavators Machine System Specifications Fuel Lines
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications Fuel Tank
C15 and C18 Engines for Caterpillar Built Machines Engine Trunnion
C13, C15, and C18 Tier 4 Final Engines Flywheel
349E Excavator Machine System Specifications Quick Coupler (Spindle)
349E Excavator Machine System Specifications Auxiliary Hydraulic Lines - Coupler Lines
349E Excavator Machine System Specifications Auxiliary Hydraulic Lines - Coupler Lines
C3.4B Engines for Caterpillar Built Machines Compression - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.