C13, C15, and C18 Tier 4 Final Engines Caterpillar


Flywheel

Usage:

826K 232


图 1g02647000

表 1
159-9019 飞轮总成的技术规格 
项目  数量  零件  技术规格说明 
12  0S-1602 螺栓  组装前,向螺纹上涂覆清洁的发动机机油、二硫化钼或石墨基润滑剂。 
拧紧至扭矩为 270 ± 40 N·m (200 ± 30 lb ft)

Caterpillar Information System:

C15 and C18 Engines for Caterpillar Built Machines Engine Trunnion
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications Fuel Tank
330D and 336D Excavators Machine System Specifications Fuel Lines
300.9D VPS Mini Hydraulic Excavator Machine Systems Hydraulic System Troubleshooting
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Control Valve - Assemble
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Control Valve - Disassemble
301.4C Mini Hydraulic Excavator Relief Valve - Test and Adjust - Pilot
2011/08/10 An Improved Support Plate Is Now Used On Certain SW60 Wheel Saws {6712}
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Check Valve - Assemble
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Check Valve - Disassemble
2011/12/05 A New Valve Assembly is Now Used on Certain Excavators and Mobile Hydraulic Power Units {5057}
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Check Valve - Install
349E Excavator Machine System Specifications Quick Coupler (Spindle)
349E Excavator Machine System Specifications Auxiliary Hydraulic Lines - Coupler Lines
349E Excavator Machine System Specifications Auxiliary Hydraulic Lines - Coupler Lines
C3.4B Engines for Caterpillar Built Machines Compression - Test
C13, C15, and C18 Tier 4 Final Engines Turbocharger
C13, C15, and C18 Tier 4 Final Engines Turbocharger
VRG-20/2, VRG-25/2 and VRG-30/2 Demolition and Sorting Grapples Hydraulic Rotator Cycle Time - Check
C13, C15, and C18 Tier 4 Final Engines Turbocharger
330D and 336D Excavators and 330D Material Handlers Machine System Specifications Pilot Lines - Travel
320E RR Excavator Hydraulic System Pump Control (Negative Flow) - Test
301.4C Mini Hydraulic Excavator Relief Valve (Main) - Test and Adjust
Installation Procedure for the Anti Drift Valve for the Blade on 307D and 308D CR Excavators {5051} Installation Procedure for the Anti Drift Valve for the Blade on 307D and 308D CR Excavators {5051}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.