Engine Enclosure Group - Remove and Install
Removal Procedure
Note: The enclosure group is identical on both sides of the machine. The right side engine enclosure group will be removed and installed.
- Raise the hood.
- Remove bolt (2). Remove panel (1) .
Note: Panel (1) contains tabs. The tabs engage into the machine.
Show/hide table
Illustration 1 | g00983682 |
- Remove bolts (3) .
Show/hide table
Illustration 2 | g00983683 |
- Remove bolts (4). Remove engine enclosure (5) .
Show/hide table
Illustration 3 | g00983684 |
Installation Procedure
- Install engine enclosure (5). Secure engine enclosure (5) with bolts (4) .
Show/hide table
Illustration 4 | g00983684 |
- Install bolts (3) .
Show/hide table
Illustration 5 | g00983683 |
- Remove panel (1). Secure panel (1) with bolts (1) .
Note: Panel (1) contains tabs. The tabs engage into the machine.
- Lower the hood.
Caterpillar Information System:
H45/H45 S, H50/H50 S, 63/H63/H63 S, 70/70 S/H70/H70 S, H90C/H90C S and 100/H100/H100 S Hydraulic Hammers Hydraulic Accumulator (High Pressure) - Disassemble
H45/H45 S, H50/H50 S, 63/H63/H63 S, 70/70 S/H70/H70 S, H90C/H90C S and 100/H100/H100 S Hydraulic Hammers Hydraulic Accumulator (Low Pressure) - Disassemble
M318C Excavator Hydraulic System Relief Valve (Medium Pressure/Cab Riser Function) - Test and Adjust
M318C Excavator Hydraulic System Flow (Medium Pressure/Cab Riser Function) - Test and Adjust
M318C Excavator Hydraulic System Flow (Medium Pressure Function) - Test and Adjust
H45/H45 S, H50/H50 S, 63/H63/H63 S, 70/70 S/H70/H70 S, H90C/H90C S and 100/H100/H100 S Hydraulic Hammers Hydraulic Accumulator (High Pressure) - Install
SW45, SW60, SW80, SW345B, SW360B, SW380B, SW460B and SW480B Wheel Saws Bit - Inspect/Replace
3176C and 3196 Engines for Caterpillar Built Machines Inlet Manifold Temperature Sensor
385B Excavator Daily Inspection
H45/H45 S, H50/H50 S, 63/H63/H63 S, 70/70 S/H70/H70 S, H90C/H90C S and 100/H100/H100 S Hydraulic Hammers Hydraulic Accumulator (Low Pressure) - Install
H45/H45 S, H50/H50 S, 63/H63/H63 S, 70/70 S/H70/H70 S, H90C/H90C S and 100/H100/H100 S Hydraulic Hammers Hydraulic Accumulator (High Pressure) - Remove
SW45, SW60, SW80, SW345B, SW360B, SW380B, SW460B and SW480B Wheel Saws Operation
C4.4 Industrial Engine Cooling System - Inspect
C4.4 Industrial Engine Piston Ring Groove - Inspect
H45/H45 S, H50/H50 S, 63/H63/H63 S, 70/70 S/H70/H70 S, H90C/H90C S and 100/H100/H100 S Hydraulic Hammers Hydraulic Accumulator (Low Pressure) - Assemble
C-10, C-12, C-15 and C-16 Industrial Engines CID 0247 FMI 09 J1939 Data Link communications
H45/H45 S, H50/H50 S, 63/H63/H63 S, 70/70 S/H70/H70 S, H90C/H90C S and 100/H100/H100 S Hydraulic Hammers Hydraulic Accumulator (High Pressure) - Assemble
320C Excavator Machine System Specifications Solenoid Valve (Quick Coupler)
314C ExcavatorEngine Supplement Oil Pan - Remove and Install
325C Excavator 3126B Engine Supplement Engine Oil Cooler - Remove and Install
312C and 315C Excavators Tool Control System System G 1a: Relief Valve (Line) - Test and Adjust
312C and 315C Excavators Tool Control System System G 1b: Relief Valve (Line) - Test and Adjust
312C and 315C Excavators Tool Control System System G 1c: Relief Valve (Line) - Test and Adjust - One-Way System
SW45, SW60, SW80, SW345B, SW360B, SW380B, SW460B and SW480B Wheel Saws Frame Slide Bars - Lubricate