 | |
| Illustration 1 | g00643446 |
Transmission hydraulic control (1) Upshift solenoid (2) Downshift solenoid | |
The solenoids receive an electrical signal from the Electronic Programmable Transmission Control (EPTC II). The solenoids supply hydraulic oil pressure for mechanical work. When upshift solenoid (1) and downshift solenoid (2) are activated, the solenoids allow hydraulic oil to flow to the rotary actuator. The hydraulic oil pressure turns the rotary actuator until upshift solenoid (1) or downshift solenoid (2) stops the hydraulic flow. The EPTC II keeps the solenoid activated until the correct signal is received from the transmission gear switch. The rotary actuator is connected to the rotary selector spool. The transmission gear switch is connected to the rotary actuator by a flexible coupling.
When the rotary selector spool is in the correct position, the EPTC II stops the electrical current flow to the solenoid. The solenoid stops the oil pressure that is going to the rotary actuator. The rotation of the rotary selector spool stops. This sequence occurs for every upshift of the transmission or downshift of the transmission except in NEUTRAL. In the NEUTRAL position, the EPTC II will keep downshift solenoid (2) activated after the shift is complete.