Engine to Torque Converter, Transmission, Output Transfer Gears - Connect
Connection Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 1P-7409     | Eyebolt     | 1     |
B     | 8S-7615     | Pin     | 2     |
8S-7611 | Tube     | 2     | |
8S-7640 | Stand     | 2     | |
FT1584 | Support Bracket     | 2     |
- Install Tooling (A), suitable lifting chains, and a hoist, as shown.
Show/hide table
Illustration 1 | g00915448 |
- Use the hoist to position the torque converter, the transmission, and the output transfer gears on the engine. The weight of torque converter, the transmission, and the output transfer gears as a unit is approximately 1070 kg (2350 lb).
- Install bolts (1) .
Show/hide table
Illustration 2 | g00915451 |
- Remove Tooling (B) from the flywheel housing.
Show/hide table
Illustration 3 | g00915450 |
End By: Install the engine, the torque converter, the transmission, and the output transfer gears. Refer to Disassembly and Assembly, "Engine, Torque Converter, Transmission, and Output Transfer Gears - Install".
Caterpillar Information System:
3054E Industrial Engine Crankshaft - Steel Crankshaft
CB-534D and CB-564D Asphalt Compactors Window Wiper and Washer Control - If Equipped
574B Forwarder Power Train Power Train Drive Loop Speed - Test and Adjust
3054E Industrial Engine Glow Plugs
776D, 777D and 777D HAA Off-Highway Truck/Tractors Power Train Electronic Control (Body Up or Down Sensor)
3054E Industrial Engine Crankshaft Pulley
PS-150B and PS-200B Paving Compactors Horn
3054E Industrial Engine Engine Oil Pressure Sensor
3054E Industrial Engine Boost Pressure Sensor
793C Off-Highway Truck Machine Systems Ladder - Remove and Install
PS-360B Paving Compactor Directional Turn Signal Control
776D, 777D and 777D HAA Off-Highway Truck/Tractors Air System and Brakes Brake Oil Overheating Troubleshooting
TK711 Track Feller Buncher, TK721 Track Feller Buncher, TK722 Track Feller Buncher and TK732 Track Feller Buncher Machine Systems Track Roller (Double Flange)
793C XQ Off-Highway Truck and 793C Off-Highway Truck Engine Supplement Muffler - Remove
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System Tilt Cylinder - Isolation and Drift Check - Integrated Toolcarrier
776D, 777D and 777D HAA Off-Highway Truck/Tractors Power Train Speed Sensor (Transmission)
PS-360B Paving Compactor Propel Control
3054E Industrial Engine Water Pump
793C XQ Off-Highway Truck and 793C Off-Highway Truck Engine Supplement Muffler - Install
Bench Test Procedure For A 735 Articulated Truck Transmission {3030, 3073, 3139} Bench Test Procedure For A 735 Articulated Truck Transmission {3030, 3073, 3139}
R2900 Load Haul Dump Alternate Exit
776D, 777D and 777D HAA Off-Highway Truck/Tractors Power Train Solenoid Valve (Transmission Upshift/Downshift)
776D, 777D and 777D HAA Off-Highway Truck/Tractors Power Train Solenoid Valve (Torque Converter Lockup Clutch)
2002/08/26 The New Autopilot Kit Is Now Available For New Lexion Combines {5900}