Propel Control
Show/hide table
 | |
| Illustration 1 | g00915652 |
FWD - Push the speed control lever forward In order to move the machine in the FORWARD position. Move the speed control lever to a more forward position in order to increase the speed of the machine.
NEUTRAL - Move the speed control lever to the center position in order to slow down or stop the machine.
REV - Pull the speed control lever in reverse in order to move the machine in the REVERSE position. Move the speed control lever to a more reverse position in order to increase the speed of the machine.
Show/hide table
| NOTICE |
|---|
Come to a complete stop before changing direction of travel. |
Caterpillar Information System:
776D, 777D and 777D HAA Off-Highway Truck/Tractors Power Train Speed Sensor (Transmission)
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System Tilt Cylinder - Isolation and Drift Check - Integrated Toolcarrier
793C XQ Off-Highway Truck and 793C Off-Highway Truck Engine Supplement Muffler - Remove
TK711 Track Feller Buncher, TK721 Track Feller Buncher, TK722 Track Feller Buncher and TK732 Track Feller Buncher Machine Systems Track Roller (Double Flange)
814F Wheel Dozer, 815F Soil Compactor and 816F Landfill CompactorEngine Supplement Engine to Torque Converter, Transmission, Output Transfer Gears - Connect
3054E Industrial Engine Crankshaft - Steel Crankshaft
CB-534D and CB-564D Asphalt Compactors Window Wiper and Washer Control - If Equipped
574B Forwarder Power Train Power Train Drive Loop Speed - Test and Adjust
3054E Industrial Engine Glow Plugs
776D, 777D and 777D HAA Off-Highway Truck/Tractors Power Train Electronic Control (Body Up or Down Sensor)
3054E Industrial Engine Crankshaft Pulley
PS-150B and PS-200B Paving Compactors Horn
3054E Industrial Engine Water Pump
793C XQ Off-Highway Truck and 793C Off-Highway Truck Engine Supplement Muffler - Install
Bench Test Procedure For A 735 Articulated Truck Transmission {3030, 3073, 3139} Bench Test Procedure For A 735 Articulated Truck Transmission {3030, 3073, 3139}
R2900 Load Haul Dump Alternate Exit
776D, 777D and 777D HAA Off-Highway Truck/Tractors Power Train Solenoid Valve (Transmission Upshift/Downshift)
776D, 777D and 777D HAA Off-Highway Truck/Tractors Power Train Solenoid Valve (Torque Converter Lockup Clutch)
2002/08/26 The New Autopilot Kit Is Now Available For New Lexion Combines {5900}
2002/09/16 A Guard Extends the Service Life of the Lift Cylinder Lubrication Hose {7510}
R1600G Load Haul Dump Hydraulic System Pressure Reducing Valve (Pilot Oil) - Test and Adjust
C15 and C18 Engines for Caterpillar Built Machines Vibration Damper
D350E Series II and D400E Series II Articulated Trucks Power Train Transmission Planetary
2002/08/26 A Special Instruction, REHS1320, "Guidelines for Evaluating the Condition of Rubber Tracks for Warranty Claims" Is Available {4198}