Illustration 1 | g00887081 |
(1) Thickness of the new friction discs ... 9.10 ± 0.08 mm (0.358 ± 0.003 inch)
(2) Thickness of the plate ... 10.40 ± 0.28 mm (0.409 ± 0.011 inch)
(3) Before assembly, lubricate the D-ring seal with the lubricant that is being sealed.
(4) Before assembly, lubricate the D-ring seal with the lubricant that is being sealed.
(5) Inside diameter of the sleeve ... 12.700 ± 0.025 mm (0.5000 ± 0.0010 inch)
(6) The 170-0108 Spring
- Assembled length ... 29.2 mm (1.15 inch)
- Load at the assembled length ... 617 N (138.7 lb)
- Operating length ... 26.0 mm (1.02 inch)
- Load at the operating length ... 829 N (186.4 lb)
- Free length after test ... 39.46 mm (1.554 inch)
- Outside diameter of the spring ... 21.5 mm (0.85 inch)
- Load at the assembled length ... 617 N (138.7 lb)
(7) Inside diameter of the planet gears ... 51.872 ± 0.010 mm (2.0422 ± 0.0004 inch)
(8) Before assembly, thoroughly lubricate the outside diameter of the sleeve bearing with the lubricant for the final drive. Outside diameter of the sleeve bearing ... 51.793 ± 0.013 mm (2.0391 ± 0.0005 inch)
(9) Outside diameter of the planet shafts ... 42.316 ± 0.008 mm (1.6660 ± 0.0003 inch)