3306 TRUCK ENGINE Caterpillar


Before Starting

Usage:

Perform required periodic maintenance before starting the engine. Make a "walk-around" inspection of the installation. It only takes a few minutes to correct minor discrepancies. This can prevent major repairs at a later date.

1. Inspect the air cleaner service indicator (if equipped). Service the air cleaner element when the indictor shows red.

NOTE: Refer to truck manufacturer's maintenance manual, for procedure to change the air cleaner element.

2. Inspect the coolant level. The level must be to the bottom of the radiator filler neck.

3. Measure the crankcase oil level. The oil level must be between the ADD and FULL marks on the dipstick.
4. Disconnect any battery chargers that are not protected against the starter current drain.
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.