Usage:
(1)Engine Crankcase
- 1. Measure the oil level with the engine running at low idle. The oil level must be between the ADD and FULL marks on the dipstick.
- 2. Add oil if necessary.
(2)Fuel Tank
Drain the moisture and sediment from the fuel tank at the start of each shift, or after the tank has been filled and allowed to stand for 5 to 10 minutes.
| NOTICE |
|---|
Do not fill the tank to the top. Fuel expands when it gets warm and can overflow. |
(3)Engine Jacket Cooling System
 |
Always remove the radiator cap with the engine stopped. Remove the radiator cap slowly to relieve pressure. Steam can cause personal injury. Inhibitor contains alkali, avoid contact with skin and eyes to prevent personal injury. |
 |
Inspect the coolant level. The level must be to the bottom of the radiator filler neck.
(4)Aftercooler Cooling System
|
Always remove the radiator cap with the engine stopped. Remove the radiator cap slowly to relieve pressure. Steam can cause personal injury. Inhibitor contains alkali, avoid contact with skin and eyes to prevent personal injury. |
|
Inspect the coolant level. The level must be to the bottom of the radiator filler neck.