3304 AND 3306 MARINE ENGINES Caterpillar


Marine Transmission Storage

Usage:

Storage Procedure

1. First, thoroughly clean the transmission and put on good quality paint.
2. If the marine transmission is to be in storage for a year or more, remove the oil and fill with new oil according to the Lubrication and Maintenance Chart. This oil will give more protection from moisture.
3. Operate the marine transmission for a short period to circulate oil.
4. Cover and/or put tape over all openings.
5. Put a waterproof or plastic cover over the unit.
6. Put a heavy amount of multipurpose grease on all outside parts that move; linkage, etc.

Procedure for Operation of Marine Transmission After Storage

1. Remove all protective covers, grease, etc.
2. Make sure the oil level is correct and that there are no concentrations of moisture (water).
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.