941 & 951 TRACK TYPE LOADERS Caterpillar

Lift Kickout

Lift control must return to HOLD from RAISE before lift cylinder pistons reach the end of their stroke.

To Adjust

1. Loosen adjusting bolt and locking bolt.

2. Move adjusting bolt up to decrease lift height.

3. Move adjusting bolt down to increase lift height.

4. Tighten both bolts. Raise and lower bucket several times to check adjustment.

Bucket Positioner

Bucket will be at preset digging angle when indicators are aligned and tilt control returns to HOLD from TILT BACK.

To Adjust

1. Loosen cam locking nuts.

2. Move cam up to increase digging angle.

3. Move cam down to decrease digging angle.

4. Tighten locking nuts. Tilt bucket back and forth several times to check adjustment.