941 & 951 TRACK TYPE LOADERS Caterpillar


After Starting

Usage:

1. Keep engine speed low until oil pressure registers. If oil pressure does not register within 30 seconds, stop engine and investigate.
2. Check gauges frequently during operation. All gauges must indicate in the normal operating range. The ammeter reading is NORMAL when the indicator is at or on the + side of zero. Check air cleaner service indicator. If RED piston is locked in the visible position have air cleaner serviced.
3. Operate engine under light load for 5 minutes.

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.