PRODUCT SUPPORT PROGRAM FOR REPLACING FUEL TANK LABELS ON CERTAIN PM1000 UNITS
Usage:
REBE2252-00
Show/hide table
| 26Jul2007 |
U-362
Show/hide table
| Before/After | PRODUCT SUPPORT PROGRAM FOR REPLACING FUEL TANK LABELS ON CERTAIN PM1000 UNITS |
|
| 1250 | PS42475 |
|
Show/hide table
| NOTE: | This Program must be administered either before or after failure. In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS42475" as the Part Number and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and "T" as the SIMS Description code. If administered after failure, use "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code. |
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
TERMINATION DATE |
| 31Jul2008 |
PROBLEM
Show/hide table
| The existing fuel tank label may state 1000 gallon fuel tank instead of the actual 488 gallons on certain PM1000 units. |
AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| PMC32 | MED00100-00125 |
PARTS NEEDED
Show/hide table
| No parts needed for this program |
ACTION REQUIRED
Show/hide table
| Check the label on the 296-9849 Fuel Tank. If the label states a capacity of 1000 Gallons (see Image 1), email the following information to Electric Power customer service engineer David Noble - email address Dnoble@CAT.com. The Genset package serial No. The fuel tank serial No. Address to mail the new label. Attach correct label to fuel tank when received. |
Show/hide table
|
| Image1 |
SERVICE CLAIM ALLOWANCES
Show/hide table
Show/hide table
| NOTE: This is a 1.0-hour job | ||||||
| This work is only to be performed when the Power Module is at the dealership. No travel cost to be paid out with this program. |
Show/hide table
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
Caterpillar Information System:
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A REVISED FLASH FILE ON THE ENGINE ELECTRONIC CONTROL MODULE (ECM) ON CERTAIN C4.4 INDUSTRIAL ENGINES (ARRANGEMENT NUMBERS 292-5307 AND 292-5304) PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A REVISED FLASH FILE ON THE ENGINE ELECTRONIC CONTROL MODULE (ECM) ON CERTAIN C4.4 INDUSTRIAL ENGINES (ARRANGEMENT NUMBERS 292-5307 AND 292-5304)
PRODUCT SUPPORT PROGRAM FOR REPLACING THE AFTERTREATMENT REGENERATION DEVICE (ARD) COMBUSTION BODY GROUP BRACKET BOLTS ON CERTAIN C13 ON-HIGHWAY TRUCK ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE AFTERTREATMENT REGENERATION DEVICE (ARD) COMBUSTION BODY GROUP BRACKET BOLTS ON CERTAIN C13 ON-HIGHWAY TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REPLACING AFTERCOOLERS ON RAW WATER COOLED C9 MARINE GENERATOR ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING AFTERCOOLERS ON RAW WATER COOLED C9 MARINE GENERATOR ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FUEL FILTER BASE ON CERTAIN 3456 GENSETS PRODUCT SUPPORT PROGRAM FOR REWORKING THE FUEL FILTER BASE ON CERTAIN 3456 GENSETS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL LINE SUPPORT BRACKETS AND HARDWARE ON CERTAIN 3516BHD LOCOMOTIVE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL LINE SUPPORT BRACKETS AND HARDWARE ON CERTAIN 3516BHD LOCOMOTIVE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR MISSING SHIPPED LOOSE PARTS ON MOUNT AS. (232-0536) ON CERTAIN C32 MODELS PRODUCT IMPROVEMENT PROGRAM FOR MISSING SHIPPED LOOSE PARTS ON MOUNT AS. (232-0536) ON CERTAIN C32 MODELS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING DISCRETE I/O MODULES AND/OR ITS MOUNTING GROUP ON CERTAIN 3516B AND 3516C 60HZ GENRATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING DISCRETE I/O MODULES AND/OR ITS MOUNTING GROUP ON CERTAIN 3516B AND 3516C 60HZ GENRATOR SETS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE PURGE AIR PUMP CHECK VALVE ON CERTAIN C13 AND C15 ON-HIGHWAY TRUCK ENGINES. PRODUCT SUPPORT PROGRAM FOR REWORKING THE PURGE AIR PUMP CHECK VALVE ON CERTAIN C13 AND C15 ON-HIGHWAY TRUCK ENGINES.
PRODUCT SUPPORT PROGRAM FOR REPORTING THE USAGE OF IMPROPER FUEL ON 2007 ON-HIGHWAY TRUCK ENGINES PRODUCT SUPPORT PROGRAM FOR REPORTING THE USAGE OF IMPROPER FUEL ON 2007 ON-HIGHWAY TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR RE-FLASHING NEW SOFTWARE ON CERTAIN 3516B 50HZ GENERATOR SETS EQUIPPED WITH ADEM II ENGINE ELECTRONIC CONTROL MODULES (ECM) PRODUCT IMPROVEMENT PROGRAM FOR RE-FLASHING NEW SOFTWARE ON CERTAIN 3516B 50HZ GENERATOR SETS EQUIPPED WITH ADEM II ENGINE ELECTRONIC CONTROL MODULES (ECM)
PRODUCT SUPPORT PROGRAM FOR INSTALLING IMPROVED FUEL MANIFOLD BRACKET ON CERTAIN 2007 C15 ON-HIGHWAY TRUCK ENGINES PRODUCT SUPPORT PROGRAM FOR INSTALLING IMPROVED FUEL MANIFOLD BRACKET ON CERTAIN 2007 C15 ON-HIGHWAY TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING 2M-9780 O-RING ON CERTAIN COMMON DESIGN GENSET PACKAGES PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING 2M-9780 O-RING ON CERTAIN COMMON DESIGN GENSET PACKAGES
PRODUCT IMPROVEMENT PROGRAM TO RELOCATE LIMIT SWITCHES AND ADD VIBRATION DAMPERS TO THE AUTOMATIC AIR SHUTOFFS(ASOS) ON CERTAIN 3508, 3512, AND 3516 ENGINES PRODUCT IMPROVEMENT PROGRAM TO RELOCATE LIMIT SWITCHES AND ADD VIBRATION DAMPERS TO THE AUTOMATIC AIR SHUTOFFS(ASOS) ON CERTAIN 3508, 3512, AND 3516 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR ADDING VIBRATION DAMPERS TO AUTOMATIC AIR SHUT OFFS ON CERTAIN 3508B, 3508C, 3512B, 3512C, 3516B, AND 3516B HD ENGINES PRODUCT IMPROVEMENT PROGRAM FOR ADDING VIBRATION DAMPERS TO AUTOMATIC AIR SHUT OFFS ON CERTAIN 3508B, 3508C, 3512B, 3512C, 3516B, AND 3516B HD ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING/REWORK OF ALTERNATORS FITTED TO CERTAIN APPLICATIONS POWERED BY 3054, 3056, C4.4, AND C6.6 ENGINES PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING/REWORK OF ALTERNATORS FITTED TO CERTAIN APPLICATIONS POWERED BY 3054, 3056, C4.4, AND C6.6 ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING XQ MODULES PRODUCT SUPPORT PROGRAM FOR REWORKING XQ MODULES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING INJECTOR SLEEVE O-RINGS ON CERTAIN C9 MTB ON-HIGHWAY TRUCK ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING INJECTOR SLEEVE O-RINGS ON CERTAIN C9 MTB ON-HIGHWAY TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING EXHAUST ROCKER ARMS ON CERTAIN C15 TRUCK ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING EXHAUST ROCKER ARMS ON CERTAIN C15 TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE POSITION OF TERMINAL CONNECTION LEADS INSIDE THE GENERATOR BOX ON CERTAIN C18 XQ600 PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE POSITION OF TERMINAL CONNECTION LEADS INSIDE THE GENERATOR BOX ON CERTAIN C18 XQ600
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE TURBOCHARGER OIL LINES ON TWIN TURBOCHARGER EQUIPPED G3516C, G3516E, G3520C, AND G3520E ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE TURBOCHARGER OIL LINES ON TWIN TURBOCHARGER EQUIPPED G3516C, G3516E, G3520C, AND G3520E ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING SOFTWARE ON CERTAIN C9 ENGINES PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING SOFTWARE ON CERTAIN C9 ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING INTERNAL INJECTOR HARNESS TRAYS ON 2007 C9 ENGINES PRODUCT SUPPORT PROGRAM FOR REWORKING INTERNAL INJECTOR HARNESS TRAYS ON 2007 C9 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE FUEL FILTER ARRANGEMENT ON CERTAIN C6.6 ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE FUEL FILTER ARRANGEMENT ON CERTAIN C6.6 ENGINES