Usage:
1. Remove bolts (4) that hold clips (3) to the front drive housing. Loosen clamps (1) to remove tube assembly (2) from the breather assemblies.
2. Remove nuts (7) and the washers to remove breather assemblies (5) from elbow (6).
3. Remove cover assembly (8) from breather assembly (5).
4. Remove element (9) from breather assembly (5).
5. Remove O-ring seals (10) from elbow (6). If necessary, remove the bolts and washers to remove elbow (6) and the gasket from the front drive housing.
Install Crankcase Breather
1. If elbow (2) was removed, put the elbow with a gasket in position on the front drive housing, and install the bolts and washers to hold these in position.
2. Install O-ring seals (1) on elbow (2), and put clean engine oil on the seals.
3. Install element (4) in breather assembly (3).
4. Install cover assembly (5) on breather assembly (3).
5. Put breather assemblies (3) in position on elbow (2), and install the nuts and washers to hold the breathers in position.
6. Put tube assembly (7) in position on the breather assemblies, and tighten clamps (6) to hold the assembly in position. Install the bolts that hold clips (8) to the front drive housing.