3500 VEHICULAR ENGINES Caterpillar

(1) Cover.

Put 2P2506 Thread Lubricant on the threads of the bolts that hold cover and housing to the case at assembly.

Tighten the bolts evenly in small increases until the torque is ... 80 N·m (60 lb.ft.)

(2) Torque for bolts ... 36 N·m (28 lb.ft.)

(3) Torque for bolt ... 78 N·m (57 lb.ft.)

(4) Torque for bolt that holds pinion ... 110 N·m (80 lb.ft.)

(5) Rotor clamp nut.

Tighten nut until clearance between rear end plate and rotor is ... 0.03 to 0.08 mm (.001 to .003 in.)

Check clearance again after the bolt for the clamp nut is tightened.

(6) Torque for bolt that holds rotor ... 120 N·m (90 lb.ft.)