Service Meter
Usage:
Remove And Install Service Meter
1. Remove bolts (1) and the clamps.
2. Remove service meter (2) from the tachometer drive adapter assembly. Check the condition of the O-ring seal on the service meter.
3. Put clean engine oil on O-ring seal (3), and install it on the service meter.
4. Install the service meter in the tachometer drive adapter assembly. Make sure the shaft of the service meter engages in the groove (slot) in the shaft of the tachometer drive.
5. Install the clamps and bolts (1) to hold service meter (2) in position. Tighten the bolts to a torque of 12 ± 4 N·m (9 ± 3 lb.ft.).
Caterpillar Information System:
3500 VEHICULAR ENGINES Alternator (An Attachment)
3500 VEHICULAR ENGINES Testing And Adjusting
3500 VEHICULAR ENGINES Pneumatic Speed Setting Control Troubleshooting
3500 VEHICULAR ENGINES Air Fuel Ratio Control Troubleshooting
3500 VEHICULAR ENGINES Governor Troubleshooting
3500 VEHICULAR ENGINES Systems Operation
3500 VEHICULAR ENGINES Testing And Adjusting
3500 VEHICULAR ENGINES Systems Operation
3500 VEHICULAR ENGINES Air Starter Motors 5N7898 (Ingersol-Rand No. SS800R/5N7898) 4W5107 (Ingersol-Rand No. SS815R/4W5107), 8N8418 (Ingersol-Rand No. SS800R/8N8418) 4W5108 (Ingersol-Rand No. SS815R/4W5108), 8N8473 (Ingersol-Rand No. SS800R/8N8473) 4W5732 (Ingersol-Ran
3500 VEHICULAR ENGINES Starter Solenoids
3500 VEHICULAR ENGINES Electric Starter Motors
3500 VEHICULAR ENGINES Alternators And Regulators
3500 VEHICULAR ENGINES Tachometer Drive
3500 VEHICULAR ENGINES Manual Shutoff
3500 VEHICULAR ENGINES Crankcase Breathers
3500 VEHICULAR ENGINES Water Temperature Regulators
3500 VEHICULAR ENGINES Water Pump
3500 VEHICULAR ENGINES Water Temperature Contactor
3500 VEHICULAR ENGINES Oil Pressure Switch
3500 VEHICULAR ENGINES Fuel Priming Pump And Fuel Filter Base
3500 VEHICULAR ENGINES Fuel Transfer Pump
3500 VEHICULAR ENGINES Oil Pump
3500 VEHICULAR ENGINES Oil Filter Base
3500 VEHICULAR ENGINES Oil Pan