Water Temperature Contactor
Usage:
Remove And Install Water Temperature Contactor
1. Drain the coolant from the cooling system.
2. Put identification marks on the electric wires for correct installation, and disconnect them from contactor (1).
3. Remove contactor (1) from the water housing.
4. Install contactor (1) in the water housing.
5. Connect the electric wires to contactor (1).
6. Fill the cooling system with coolant to the correct level. See the Maintenance Guide.
Caterpillar Information System:
3500 VEHICULAR ENGINES Water Pump
3500 VEHICULAR ENGINES Water Temperature Regulators
3500 VEHICULAR ENGINES Crankcase Breathers
3500 VEHICULAR ENGINES Manual Shutoff
3500 VEHICULAR ENGINES Tachometer Drive
3500 VEHICULAR ENGINES Service Meter
3500 VEHICULAR ENGINES Alternator (An Attachment)
3500 VEHICULAR ENGINES Testing And Adjusting
3500 VEHICULAR ENGINES Pneumatic Speed Setting Control Troubleshooting
3500 VEHICULAR ENGINES Air Fuel Ratio Control Troubleshooting
3500 VEHICULAR ENGINES Governor Troubleshooting
3500 VEHICULAR ENGINES Systems Operation
3500 VEHICULAR ENGINES Oil Pressure Switch
3500 VEHICULAR ENGINES Fuel Priming Pump And Fuel Filter Base
3500 VEHICULAR ENGINES Fuel Transfer Pump
3500 VEHICULAR ENGINES Oil Pump
3500 VEHICULAR ENGINES Oil Filter Base
3500 VEHICULAR ENGINES Oil Pan
3500 VEHICULAR ENGINES Oil Scavenge Pump
3500 VEHICULAR ENGINES Oil Sequence Valves
3500 VEHICULAR ENGINES Oil Cooler
3500 VEHICULAR ENGINES Trunnion
3500 VEHICULAR ENGINES Turbochargers (TV91)
3500 VEHICULAR ENGINES Turbochargers (C153)