Power Take-Off Clutch
Usage:
3N7840 CLUTCH
A force (F) of 95 to 125 lbs. (425 to 555 N) must be necessary to engage the clutch. The force must be at 90° to the clutch lever and 13.6 in. (345 mm) from the center of the lever shaft.
Torque the bolt that holds the clutch lever on the shaft to ... 75 lb.ft.(100 N·m)
(1) Torque for hub nut ... 30 lb.ft.(40 N·m) + 60° to 90°
(2) Torque for bolt that holds the lock in place ... 21 lb.ft.(26 N·m)
(3) End clearance for shaft ... .004 to .007 in.(0.10 to 0.18 mm)
(4) Thickness of clutch plate (new) ... .433 to .443 in.(11.00 to 11.25 mm)
(5) Torque for two bolts that hold the yoke to the shaft ... 38 lb.ft.(51 N·m)
(6) Torque for two bolts that hold the collar assembly together ... 30 lb.ft.(40 N·m)
Caterpillar Information System:
3208 INDUSTRIAL ENGINE Sending Unit For Engine Oil Pressure 2N782 Sending Unit; Use with 2N781 Gauge.
3208 INDUSTRIAL ENGINE Gauge For Engine Oil Pressure 2N781 Gauge; Use with 2N782 Sending Unit.
3208 INDUSTRIAL ENGINE Sending Unit For Water Temperature 2N1311 Sending Unit; Use with 5L7446 Gauge.
3208 INDUSTRIAL ENGINE Gauge For Water Temperature 5L7446 Gauge; Use with 2N1311 Sending Unit.
3208 INDUSTRIAL ENGINE Water Temperature Switch 2N2920 Switch
3208 INDUSTRIAL ENGINE Introduction
3208 INDUSTRIAL ENGINE Testing And Adjusting
3208 INDUSTRIAL ENGINE Systems Operation
3208 INDUSTRIAL ENGINE Shutoff Solenoid
3208 INDUSTRIAL ENGINE Starter Motors
3208 INDUSTRIAL ENGINE Starter Solenoids
3208 INDUSTRIAL ENGINE Alternator Regulators
3208 INDUSTRIAL ENGINE Power Take-Off Clutch
3208 INDUSTRIAL ENGINE Engine Support Group 1N9939
3208 INDUSTRIAL ENGINE Mounting Group For AT540, MT643, and MT653 Allison Transmission
3208 INDUSTRIAL ENGINE Fan Mounting Pulley Assemblies
3208 INDUSTRIAL ENGINE System Operation
3208 INDUSTRIAL ENGINE Testing And Adjusting
3208 INDUSTRIAL ENGINE Introduction
3208 INDUSTRIAL ENGINE General Instructions
3208 INDUSTRIAL ENGINE Introduction
3208 INDUSTRIAL ENGINE Air Inlet Manifold
3208 INDUSTRIAL ENGINE Air Inlet Manifold (Later)
3208 INDUSTRIAL ENGINE Water Separator