Alternator Regulators
Usage:
6N3161 12V (Motorola Number 8RD2018)
Polarity is negative ground or insulated.
Voltage setting range ... 13.2 to 14.4 V
(1) Remove cap to adjust voltage.
Turn the adjustment screw clockwise to increase voltage. There are five adjustment positions.
Position 1 ... 14.2 to 14.7 V
Position 2 ... 14.1 ± .2 V
Position 3* ... 13.8 ± .2 V
Position 4 ... 13.5 ± .2 V
Position 5 ... 13.2 ± .2 V
*New regulators are adjusted at the factory to Position 3.
6N3160 24V (Motorola Number 8RD3019)
Polarity is negative ground or insulated.
Voltage setting range ... 26.8 to 29.2 V
(1) Remove cap to adjust voltage.
Turn the adjustment screw clockwise to increase voltage. There are five adjustment positions.
Position 1 ... 29.25 ± .35 V
Position 2 ... 28.6 ± .3 V
Position 3* ... 28.0 ± .3 V
Position 4 ... 27.4 ± .3 V
Position 5 ... 26.8 ± .3 V
*New regulators are adjusted at the factory to Position 3.
Caterpillar Information System:
3208 INDUSTRIAL ENGINE Alternators And Regulators
3208 INDUSTRIAL ENGINE Flywheel
3208 INDUSTRIAL ENGINE Pulley And Damper
3208 INDUSTRIAL ENGINE Flywheel Housing Bore
3208 INDUSTRIAL ENGINE Flywheel Housing Runout
3208 INDUSTRIAL ENGINE Flywheel Runout
3208 INDUSTRIAL ENGINE Bearings For Connecting Rods And Mains
3208 INDUSTRIAL ENGINE Crankshaft
3208 INDUSTRIAL ENGINE Pistons And Rings
3208 INDUSTRIAL ENGINE Connecting Rod
3208 INDUSTRIAL ENGINE Cylinder Block
3208 INDUSTRIAL ENGINE V-Belt Tension Chart
3208 INDUSTRIAL ENGINE Starter Solenoids
3208 INDUSTRIAL ENGINE Starter Motors
3208 INDUSTRIAL ENGINE Shutoff Solenoid
3208 INDUSTRIAL ENGINE Systems Operation
3208 INDUSTRIAL ENGINE Testing And Adjusting
3208 INDUSTRIAL ENGINE Introduction
3208 INDUSTRIAL ENGINE Water Temperature Switch 2N2920 Switch
3208 INDUSTRIAL ENGINE Gauge For Water Temperature 5L7446 Gauge; Use with 2N1311 Sending Unit.
3208 INDUSTRIAL ENGINE Sending Unit For Water Temperature 2N1311 Sending Unit; Use with 5L7446 Gauge.
3208 INDUSTRIAL ENGINE Gauge For Engine Oil Pressure 2N781 Gauge; Use with 2N782 Sending Unit.
3208 INDUSTRIAL ENGINE Sending Unit For Engine Oil Pressure 2N782 Sending Unit; Use with 2N781 Gauge.
3208 INDUSTRIAL ENGINE Power Take-Off Clutch