Carburetor (3304)
Usage:
Remove Carburetor (3304)
1. Loosen clamp (1) and move the clamp to the right.
2. Remove bolt (2) from the control rod.
3. Remove two bolts (4), washers and nuts.
4. Remove carburetor (3) from the engine.
Install Carburetor (3304)
1. Put gasket (2) and carburetor (1) in position. Install the bolts, washers and nuts that hold the carburetor to adapter (3).
2. Put clamp (4) in position and tighten.
3. Fasten control rod (5) to the lever on the carburetor.
4. Check the linkage adjustment. See GOVERNOR LINKAGE ADJUSTMENT in TESTING AND ADJUSTING.
Caterpillar Information System:
3304 & 3306 NATURAL GAS ENGINES Carburetor (3306)
3304 & 3306 NATURAL GAS ENGINES Gas Pressure Regulator
3304 & 3306 NATURAL GAS ENGINES Turbocharger (3306)
3304 & 3306 NATURAL GAS ENGINES Boost Control Valve (3306)
3304 & 3306 NATURAL GAS ENGINES Air Cleaner (3304)
3304 & 3306 NATURAL GAS ENGINES Air Cleaner (3306)
3304 & 3306 NATURAL GAS ENGINES General Instructions
3208 TRUCK ENGINE Crankcase Breather
3208 TRUCK ENGINE Air Inlet Manifold
3208 TRUCK ENGINE Exhaust Recirculation Tube Assembly
3208 TRUCK ENGINE Exhaust Recirculation Valve
3208 TRUCK ENGINE Actuator
3304 & 3306 NATURAL GAS ENGINES Carburetor
3304 & 3306 NATURAL GAS ENGINES Spark Plugs, Spark Plug Adapters
3304 & 3306 NATURAL GAS ENGINES Instrument Panel
3304 & 3306 NATURAL GAS ENGINES Aftercooler (3306)
3304 & 3306 NATURAL GAS ENGINES Water Temperature Regulator
3304 & 3306 NATURAL GAS ENGINES Water Pump
3304 & 3306 NATURAL GAS ENGINES Auxiliary Pump (Fresh Water-3306)
3304 & 3306 NATURAL GAS ENGINES Accessory Drive (3306), Service Meter
3304 & 3306 NATURAL GAS ENGINES Magneto
3304 & 3306 NATURAL GAS ENGINES Magneto Drive
3304 & 3306 NATURAL GAS ENGINES Governor And Governor Drive
3304 & 3306 NATURAL GAS ENGINES Governor