Water Temperature Regulator
Usage:
Remove Water Temperature Regulator
NOTE: Photos shown are on 3306.
1. Drain the coolant from the cooling system below the level of the water temperature regulator.
2. Remove bolts (2) and clip (3).
3. Remove pipe (1) and gasket from the cylinder head.
4. Remove water temperature regulator (4).
Install Water Temperature Regulator
1. Put the water temperature regulator (1) into position in the cylinder head.
2. Install a new gasket and pipe (2) over the water temperature regulator.
3. Install clip (3) and bolts that hold pipe (2) in place.
4. Fill the cooling system with coolant to the correct level.
Caterpillar Information System:
3304 & 3306 NATURAL GAS ENGINES Aftercooler (3306)
3304 & 3306 NATURAL GAS ENGINES Instrument Panel
3304 & 3306 NATURAL GAS ENGINES Spark Plugs, Spark Plug Adapters
3304 & 3306 NATURAL GAS ENGINES Carburetor
3304 & 3306 NATURAL GAS ENGINES Carburetor (3304)
3304 & 3306 NATURAL GAS ENGINES Carburetor (3306)
3304 & 3306 NATURAL GAS ENGINES Gas Pressure Regulator
3304 & 3306 NATURAL GAS ENGINES Turbocharger (3306)
3304 & 3306 NATURAL GAS ENGINES Boost Control Valve (3306)
3304 & 3306 NATURAL GAS ENGINES Air Cleaner (3304)
3304 & 3306 NATURAL GAS ENGINES Air Cleaner (3306)
3304 & 3306 NATURAL GAS ENGINES General Instructions
3304 & 3306 NATURAL GAS ENGINES Water Pump
3304 & 3306 NATURAL GAS ENGINES Auxiliary Pump (Fresh Water-3306)
3304 & 3306 NATURAL GAS ENGINES Accessory Drive (3306), Service Meter
3304 & 3306 NATURAL GAS ENGINES Magneto
3304 & 3306 NATURAL GAS ENGINES Magneto Drive
3304 & 3306 NATURAL GAS ENGINES Governor And Governor Drive
3304 & 3306 NATURAL GAS ENGINES Governor
3304 & 3306 NATURAL GAS ENGINES Governor Drive
3304 & 3306 NATURAL GAS ENGINES Oil Filter Base
3304 & 3306 NATURAL GAS ENGINES Engine Oil Cooler
3304 & 3306 NATURAL GAS ENGINES Vibration Damper and Pulley
3304 & 3306 NATURAL GAS ENGINES Crankshaft Front Seal and Wear Sleeve