Oil Pan
Usage:
Remove Oil Pan
1. Drain the oil from the engine.
2. Remove the oil gauge assembly. Remove bolts (2). Remove guide assembly (1) for the oil gauge.
3. Remove the bolts and washers that hold the oil pan to the engine block.
4. Remove the oil pan.
Install Oil Pan
1. Replace the oil pan gasket if necessary.
2. Put the oil pan in position on the engine and install the bolts and washers.
3. Install the oil gauge guide assembly and the oil gauge assembly.
4. Fill the engine with oil to the correct level.
Caterpillar Information System:
3306 DIESEL TRUCK ENGINE Crankshaft Front Seal And Wear Sleeve
3306 DIESEL TRUCK ENGINE Engine Front Support
3306 DIESEL TRUCK ENGINE Vibration Damper And Pulley
3306 DIESEL TRUCK ENGINE Fan Drive
3306 DIESEL TRUCK ENGINE Water Pump
3306 DIESEL TRUCK ENGINE Water Temperature Regulator
3306 DIESEL TRUCK ENGINE Oil Filter Base
3306 DIESEL TRUCK ENGINE Oil Cooler
3306 DIESEL TRUCK ENGINE Air Compressor
3306 DIESEL TRUCK ENGINE Fuel Injection Pump Housing
3306 DIESEL TRUCK ENGINE Fuel Transfer Pump
3306 DIESEL TRUCK ENGINE Fuel Injection Pumps
3306 DIESEL TRUCK ENGINE Oil Pump
3306 DIESEL TRUCK ENGINE Connecting Rod Bearings
3306 DIESEL TRUCK ENGINE Crankshaft Main Bearings
3306 DIESEL TRUCK ENGINE Timing Gear Cover
3306 DIESEL TRUCK ENGINE Fuel Pump Drive Gear And Automatic Timing Advance
3306 DIESEL TRUCK ENGINE Automatic Timing Advance
3306 DIESEL TRUCK ENGINE Timing Gears And Plate
3306 DIESEL TRUCK ENGINE Flywheel
3306 DIESEL TRUCK ENGINE Crankshaft Rear Seal And Wear Sleeve
3306 DIESEL TRUCK ENGINE Flywheel Housing
3306 DIESEL TRUCK ENGINE Turbocharger
3306 DIESEL TRUCK ENGINE Fuel Injection Valves