Air Compressor
Usage:
Remove Air Compression
1. Drain the coolant from the cooling system.
2. Remove air inlet line (2). Remove the air outlet line.
3. Disconnect water lines (1) and (3). Disconnect oil line (4). Disconnect oil level gauge bracket (5).
4. Remove the bolts that hold the air compressor to the front plate.
5. Remove the air compressor. Weight is 54 lb. (24.5 kg).
6. Inspect bearing (6) and make a replacement if needed. See WATER PUMP DISASSEMBLE AND ASSEMBLE if replacement is necessary.
Install Air Compressor
1. Put the air compressor in position on the front plate and install the bolts.
2. Connect the oil line. Connect the oil level gauge bracket.
3. Connect the water lines and air lines.
4. Fill the cooling system to the correct level.
Caterpillar Information System:
3306 DIESEL TRUCK ENGINE Fuel Injection Pump Housing
3306 DIESEL TRUCK ENGINE Fuel Transfer Pump
3306 DIESEL TRUCK ENGINE Fuel Injection Pumps
3306 DIESEL TRUCK ENGINE Governor
3306 DIESEL TRUCK ENGINE Fuel Injection Pump Housing And Governor
3306 DIESEL TRUCK ENGINE Adapter Housing And Levers
3306 DIESEL TRUCK ENGINE Fuel Check Valve And Bypass Valve
3306 DIESEL TRUCK ENGINE Fuel Shutoff Solenoid
3306 DIESEL TRUCK ENGINE Fuel Ratio Control
3306 DIESEL TRUCK ENGINE Fuel Injection Pump Housing And Governor
3306 DIESEL TRUCK ENGINE Fuel Filter
3306 DIESEL TRUCK ENGINE Tachometer Drive
3306 DIESEL TRUCK ENGINE Oil Cooler
3306 DIESEL TRUCK ENGINE Oil Filter Base
3306 DIESEL TRUCK ENGINE Water Temperature Regulator
3306 DIESEL TRUCK ENGINE Water Pump
3306 DIESEL TRUCK ENGINE Fan Drive
3306 DIESEL TRUCK ENGINE Vibration Damper And Pulley
3306 DIESEL TRUCK ENGINE Engine Front Support
3306 DIESEL TRUCK ENGINE Crankshaft Front Seal And Wear Sleeve
3306 DIESEL TRUCK ENGINE Oil Pan
3306 DIESEL TRUCK ENGINE Oil Pump
3306 DIESEL TRUCK ENGINE Connecting Rod Bearings
3306 DIESEL TRUCK ENGINE Crankshaft Main Bearings