Automatic Timing Advance
Usage:
Disassemble Automatic Timing Advance
start by:
a) remove fuel pump drive gear and automatic timing advance
1. Remove four screws (1). Remove plate (2).
2. Remove springs (3) and (4) from each side. Remove weights (5) and slides (6) from each side.
Assemble Automatic Timing Advance
1. Install the slides and weights.
2. Install all four springs.
3. Install the plate and four screws.
end by:
a) install fuel pump drive gear and automatic timing advance
Caterpillar Information System:
3306 DIESEL TRUCK ENGINE Fuel Pump Drive Gear And Automatic Timing Advance
3306 DIESEL TRUCK ENGINE Timing Gear Cover
3306 DIESEL TRUCK ENGINE Crankshaft Main Bearings
3306 DIESEL TRUCK ENGINE Connecting Rod Bearings
3306 DIESEL TRUCK ENGINE Oil Pump
3306 DIESEL TRUCK ENGINE Oil Pan
3306 DIESEL TRUCK ENGINE Crankshaft Front Seal And Wear Sleeve
3306 DIESEL TRUCK ENGINE Engine Front Support
3306 DIESEL TRUCK ENGINE Vibration Damper And Pulley
3306 DIESEL TRUCK ENGINE Fan Drive
3306 DIESEL TRUCK ENGINE Water Pump
3306 DIESEL TRUCK ENGINE Water Temperature Regulator
3306 DIESEL TRUCK ENGINE Timing Gears And Plate
3306 DIESEL TRUCK ENGINE Flywheel
3306 DIESEL TRUCK ENGINE Crankshaft Rear Seal And Wear Sleeve
3306 DIESEL TRUCK ENGINE Flywheel Housing
3306 DIESEL TRUCK ENGINE Turbocharger
3306 DIESEL TRUCK ENGINE Fuel Injection Valves
3306 DIESEL TRUCK ENGINE Precombustion Chambers
3306 DIESEL TRUCK ENGINE Valve Cover
3306 DIESEL TRUCK ENGINE Rocker Shaft Assembly And Push Rods
3306 DIESEL TRUCK ENGINE Rocker Shaft
3306 DIESEL TRUCK ENGINE Valve Lifters
3306 DIESEL TRUCK ENGINE Rocker Shaft And Push Rods (Spacer Plate)