Oil Filter Base
Usage:
Remove & Install Oil Filter Base (Marine Engine)
1. Disconnect hose assemblies (1), (2), and (3).
2. Remove oil filters (4) with tool (A).
3. Remove bolts (5) and oil filter base (6).
NOTE: The following steps are for installation of the oil filter base.
4. Put oil filter base (6) in position and install bolts (5).
5. Install oil filters (4).
6. Connect hose assemblies (1), (2), and (3).
7. Start and run the engine. Make a check of the engine oil level and add engine oil to the correct level. See the Operation & Maintenance Manual.
Caterpillar Information System:
3208 INDUSTRIAL & MARINE ENGINES Oil Filter Base & Engine Oil Cooler
3208 INDUSTRIAL & MARINE ENGINES Engine Oil Cooler
3208 INDUSTRIAL & MARINE ENGINES Sea Water Pump
3208 INDUSTRIAL & MARINE ENGINES Water Temperature Regulators
3208 INDUSTRIAL & MARINE ENGINES Water Pump
3208 INDUSTRIAL & MARINE ENGINES Expansion Tank & Heat Exchanger
3208 INDUSTRIAL & MARINE ENGINES Exhaust Manifolds
3208 INDUSTRIAL & MARINE ENGINES Turbocharger (Marine Engine)
3208 INDUSTRIAL & MARINE ENGINES Air Inlet Manifold
3208 INDUSTRIAL & MARINE ENGINES Fuel Injection Lines
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR Testing and Adjusting
SUPPLEMENT FOR - 3114, 3116 AND 3126 ENGINES FOR CATERPILLAR Systems Operation
3208 INDUSTRIAL & MARINE ENGINES Fuel Filter Base
3208 INDUSTRIAL & MARINE ENGINES Fuel Injection Pump Housing & Governor
3208 INDUSTRIAL & MARINE ENGINES Check Valve & Bypass Valve
3208 INDUSTRIAL & MARINE ENGINES Shutoff Housing
3208 INDUSTRIAL & MARINE ENGINES Fuel Injection Pumps
3208 INDUSTRIAL & MARINE ENGINES Fuel Transfer Pump
3208 INDUSTRIAL & MARINE ENGINES Fuel Injection Pump Housing
3208 INDUSTRIAL & MARINE ENGINES Governor
3208 INDUSTRIAL & MARINE ENGINES Valve Covers
3208 INDUSTRIAL & MARINE ENGINES Fuel Return Manifolds
3208 INDUSTRIAL & MARINE ENGINES Crankcase Ventilator Valve
3208 INDUSTRIAL & MARINE ENGINES Rocker Shaft Assemblies & Push Rods