The Governor Output Lever Needs To Be Repositioned On Certain 3406B Generator Set Engines
Usage:
@media screen {
div.divFooter {
display: none;
}
}
@media print {
div.divFooter {
position: fixed;
bottom: 0;
right: 0;
}
}
NOTE: This Program must be administered as soon as possible. When reporting the repair, use "PI1221" as the Part Number, "7751" as the Group Number, "56" as the warranty Claim Description Code and "T " as the SIMS Description Code.
Problem
The governor output lever needs to be repositioned on certain 3406B Generator Set Engines.
Affected Product
Model & Identification Number
3406B (2WB12284, 2WB12303, 2WB12325, 2WB12330, 2WB12356, 2WB12358, 2WB12359, 2WB12363, 2WB12365, 2WB12373, 2WB12374, 2WB12377, 2WB12378, 2WB12380, 2WB12497, 2WB12499, 2WB12511, 2WB12517, 2WB12542, 2WB12556, 2WB12568, 2WB12581, 2WB12603, 2WB12604, 2WB12653-12655, 2WB12663)
Parts Needed
Not applicable.
Action Required
Remove the 2 - 6H0187 Bolts and 3D8752 Locknuts from each end of the 5P6672 Control Rod ends. Position the control rod so the grease fittings face down toward the base of the engine. Install the 2 - 6H0187 Bolts and 3D8752 Locknuts and tighten the bolts to a torque of 25 ± 6 Nm (18 ± 4 lb ft).
Owner Notification
U.S. and Canadian owners will receive the attached Owner Notification.
Service Claim Allowances
NOTE: This is a 1-hour job.
Parts Disposition
Handle the parts in accordance with your warranty Bulletin on warranty parts handling.
NOTE: MAKE EVERY EFFORT TO COMPLETE THIS PROGRAM AS SOON AS POSSIBLE.
Attach. (1-Owner Notification)
Copy Of Owner Notification For U.S. And Canadian Owners
Caterpillar Information System:
Product Support Program For Installing An Inlet Air Manifold Heater On Certain 460 H.P. 3406B And 3406C Truck Engines Product Support Program For Installing An Inlet Air Manifold Heater On Certain 460 H.P. 3406B And 3406C Truck Engines
Inlet Air Temperature Sensor Needs To Be Installed On Certain 1991 Model Year 3176 Truck Engines (7LG) Inlet Air Temperature Sensor Needs To Be Installed On Certain 1991 Model Year 3176 Truck Engines (7LG)
Product Support Program For Installing A New Expansion Tank Pressure Cap, Coolant Recovery Bottle, And Water Line Fitting On Certain 3208 Marine Engines Product Support Program For Installing A New Expansion Tank Pressure Cap, Coolant Recovery Bottle, And Water Line Fitting On Certain 3208 Marine Engines
All 3E1815, 3E8651, And 9X9655 Sensors Need To Be Removed From Parts Stock All 3E1815, 3E8651, And 9X9655 Sensors Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
The 9U5024 Master Nozzle Group Used On Certain Test Benches Needs To Be Replaced The 9U5024 Master Nozzle Group Used On Certain Test Benches Needs To Be Replaced
Product Support Program For Fuel Injectors On Certain Challenger 75 Tractors And 3176 Truck Engines Product Support Program For Fuel Injectors On Certain Challenger 75 Tractors And 3176 Truck Engines
Remove All 8N6862 And 8N6863 Seals From Parts Stock Remove All 8N6862 And 8N6863 Seals From Parts Stock
Product Support Program For Installing An Intake Manifold Heater On Certain 3306C Truck Engines Product Support Program For Installing An Intake Manifold Heater On Certain 3306C Truck Engines
Product Support Program For Installing New Fuel Injection Line Groups On Certain 3408 Generator Set, Industrial, And Marine Engines Product Support Program For Installing New Fuel Injection Line Groups On Certain 3408 Generator Set, Industrial, And Marine Engines
All 4P7135 Sleeves Need To Be Removed From Parts Stock All 4P7135 Sleeves Need To Be Removed From Parts Stock
Product Support Program For Replacing The Fuel Line Groups On Certain D6H And D7H Tractors; 14G And 140G Motor Graders; Challenger 65 Tractors; 235C Excavators; 615C And 627E Tractors; 637E Scrapers; 815B And 816B Compactors, 966E And 966F Loaders; A Product Support Program For Replacing The Fuel Line Groups On Certain D6H And D7H Tractors; 14G And 140G Motor Graders; Challenger 65 Tractors; 235C Excavators; 615C And 627E Tractors; 637E Scrapers; 815B And 816B Compactors, 966E And 966F Loaders; A
Remove All 9Y1484, 7W7730 And 4P0601 Gaskets From Parts Stock. Remove All 9Y1484, 7W7730 And 4P0601 Gaskets From Parts Stock.
The 9S4188 Plug In The Housing Of The 6I1929 Auxiliary Sea Water Pump On Certain 3408 And 3412 Marine Engines Needs To Be Replaced The 9S4188 Plug In The Housing Of The 6I1929 Auxiliary Sea Water Pump On Certain 3408 And 3412 Marine Engines Needs To Be Replaced
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
Product Support Program For The Replacement Of The Spark Plug Wire Assemblies On Certain G3406 Engines Product Support Program For The Replacement Of The Spark Plug Wire Assemblies On Certain G3406 Engines
Product Support Program For Increasing Oil Volume To The Governor Servo Supply And Installing New Bonnets On The Fuel Injection Pumps On Certain 3408 And 3412 Marine Engines To Improve Startability And Prevent Power Loss Product Support Program For Increasing Oil Volume To The Governor Servo Supply And Installing New Bonnets On The Fuel Injection Pumps On Certain 3408 And 3412 Marine Engines To Improve Startability And Prevent Power Loss
Certain 2S7264 And 3S1467 Fuel Injection Pump Assemblies Need To Be Removed From Parts Stock Certain 2S7264 And 3S1467 Fuel Injection Pump Assemblies Need To Be Removed From Parts Stock
Product Support Program For Timing Gear Housing Gasket Leaks On Certain Challenger 75 Tractors And 3176 Truck Engines Product Support Program For Timing Gear Housing Gasket Leaks On Certain Challenger 75 Tractors And 3176 Truck Engines
Product Support Program For Replacing The Oil Level Gage On Certain G3412 Engines Product Support Program For Replacing The Oil Level Gage On Certain G3412 Engines
PARTS STOCK ACTION ONLY - THE COMPRESSOR WHEEL NUT NEEDS TO BE TIGHTENED ON CERTAIN REMANUFACTURED TURBOCHARGER GROUPS AND TUR BOCHARGER CARTRIDGE ASSEMBLIES - PI7319 - MAILED US AND CANADA, CACO, COFA, BRAZIL, CFEL, COSA PARTS STOCK ACTION ONLY - THE COMPRESSOR WHEEL NUT NEEDS TO BE TIGHTENED ON CERTAIN REMANUFACTURED TURBOCHARGER GROUPS AND TUR BOCHARGER CARTRIDGE ASSEMBLIES - PI7319 - MAILED US AND CANADA, CACO, COFA, BRAZIL, CFEL, COSA
The Spark Plugs May Need To Be Replaced In Certain G3304, G3306, G3406, G3408 And G3412 Engines The Spark Plugs May Need To Be Replaced In Certain G3304, G3306, G3406, G3408 And G3412 Engines
Update Kits Need To Be Installed On Certain XQ125, XQ225 And XQ350 Trailers With 3304B, 3306B, And 3406B Generator Sets Update Kits Need To Be Installed On Certain XQ125, XQ225 And XQ350 Trailers With 3304B, 3306B, And 3406B Generator Sets
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock