Product Support Program For Timing Gear Housing Gasket Leaks On Certain Challenger 75 Tractors And 3176 Truck Engines Caterpillar


Product Support Program For Timing Gear Housing Gasket Leaks On Certain Challenger 75 Tractors And 3176 Truck Engines

Usage:

@media screen { div.divFooter { display: none; } } @media print { div.divFooter { position: fixed; bottom: 0; right: 0; } }
Caterpillar: Confidential Yellow

NOTE: This Program can only be administered after a failure occurs. The decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS0684" as the Part Number and "7755" as the Group Number. Use "96" as the Warranty Claim Description Code and use " Z" as the SIMS Description Code.

Termination Date

December 31, 1993

Problem

The 7C8255 or 4P8165 Gasket, located between the timing gear housing and the spacer block, may leak on certain Challenger 75 Tractors and 3176 Truck Engines.

Affected Product
Model & Identification Number

Challenger 75 (4CJ1-479)

3176 (2YG1-Up; 7LG1-9753)

Parts Needed

4 - 9M1974 Washer
4 - 9U5177 Inserts (as required)
4 - 6V2317 Bolt (as required)
4 - 6V5219 Bolt (as required)
1 - 7X7973 Gasket Kit*
1 - 1011286 Plate
1 - 1011287 Gasket


*Do not use the existing 7C8255 or 4P8165 Gasket from the gasket kit. Replace it with a 1011287 Gasket.

Action Required

If a 7C8255 or 4P8165 Gasket leaks, refer to Special Instructions SEHS9672, "3176 Engine Timing Gear Housing Gasket Repair" to repair the engine.

Service Claim Allowances

Challenger 75 Tractors

NOTE: This is a 30-hour job.

3176 Truck Engines

Parts Disposition

Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.

Caterpillar Information System:

Certain 2S7264 And 3S1467 Fuel Injection Pump Assemblies Need To Be Removed From Parts Stock Certain 2S7264 And 3S1467 Fuel Injection Pump Assemblies Need To Be Removed From Parts Stock
Product Support Program For Increasing Oil Volume To The Governor Servo Supply And Installing New Bonnets On The Fuel Injection Pumps On Certain 3408 And 3412 Marine Engines To Improve Startability And Prevent Power Loss Product Support Program For Increasing Oil Volume To The Governor Servo Supply And Installing New Bonnets On The Fuel Injection Pumps On Certain 3408 And 3412 Marine Engines To Improve Startability And Prevent Power Loss
Product Support Program For The Replacement Of The Spark Plug Wire Assemblies On Certain G3406 Engines Product Support Program For The Replacement Of The Spark Plug Wire Assemblies On Certain G3406 Engines
Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines Product Support Program For The Rework Of The Timing Advance Mechanism On Certain 3406B And 3406C Truck Engines
The 9S4188 Plug In The Housing Of The 6I1929 Auxiliary Sea Water Pump On Certain 3408 And 3412 Marine Engines Needs To Be Replaced The 9S4188 Plug In The Housing Of The 6I1929 Auxiliary Sea Water Pump On Certain 3408 And 3412 Marine Engines Needs To Be Replaced
Remove All 9Y1484, 7W7730 And 4P0601 Gaskets From Parts Stock. Remove All 9Y1484, 7W7730 And 4P0601 Gaskets From Parts Stock.
The Governor Output Lever Needs To Be Repositioned On Certain 3406B Generator Set Engines The Governor Output Lever Needs To Be Repositioned On Certain 3406B Generator Set Engines
Product Support Program For Installing An Inlet Air Manifold Heater On Certain 460 H.P. 3406B And 3406C Truck Engines Product Support Program For Installing An Inlet Air Manifold Heater On Certain 460 H.P. 3406B And 3406C Truck Engines
Inlet Air Temperature Sensor Needs To Be Installed On Certain 1991 Model Year 3176 Truck Engines (7LG) Inlet Air Temperature Sensor Needs To Be Installed On Certain 1991 Model Year 3176 Truck Engines (7LG)
Product Support Program For Installing A New Expansion Tank Pressure Cap, Coolant Recovery Bottle, And Water Line Fitting On Certain 3208 Marine Engines Product Support Program For Installing A New Expansion Tank Pressure Cap, Coolant Recovery Bottle, And Water Line Fitting On Certain 3208 Marine Engines
All 3E1815, 3E8651, And 9X9655 Sensors Need To Be Removed From Parts Stock All 3E1815, 3E8651, And 9X9655 Sensors Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing The Oil Level Gage On Certain G3412 Engines Product Support Program For Replacing The Oil Level Gage On Certain G3412 Engines
PARTS STOCK ACTION ONLY - THE COMPRESSOR WHEEL NUT NEEDS TO BE TIGHTENED ON CERTAIN REMANUFACTURED TURBOCHARGER GROUPS AND TUR BOCHARGER CARTRIDGE ASSEMBLIES - PI7319 - MAILED US AND CANADA, CACO, COFA, BRAZIL, CFEL, COSA PARTS STOCK ACTION ONLY - THE COMPRESSOR WHEEL NUT NEEDS TO BE TIGHTENED ON CERTAIN REMANUFACTURED TURBOCHARGER GROUPS AND TUR BOCHARGER CARTRIDGE ASSEMBLIES - PI7319 - MAILED US AND CANADA, CACO, COFA, BRAZIL, CFEL, COSA
The Spark Plugs May Need To Be Replaced In Certain G3304, G3306, G3406, G3408 And G3412 Engines The Spark Plugs May Need To Be Replaced In Certain G3304, G3306, G3406, G3408 And G3412 Engines
Update Kits Need To Be Installed On Certain XQ125, XQ225 And XQ350 Trailers With 3304B, 3306B, And 3406B Generator Sets Update Kits Need To Be Installed On Certain XQ125, XQ225 And XQ350 Trailers With 3304B, 3306B, And 3406B Generator Sets
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
The Seal Between The 40-PIN Plug Assembly Of The Main Engine Wiring Harness And The Electronic Control Module (ECM) Needs To Be Replaced On Certain 3406E Engines The Seal Between The 40-PIN Plug Assembly Of The Main Engine Wiring Harness And The Electronic Control Module (ECM) Needs To Be Replaced On Certain 3406E Engines
Certain 9L9216 Plunger And Barrel Assemblies Need To Be Removed From Parts Stock Certain 9L9216 Plunger And Barrel Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Washers On The Fan Drive And Fan Drive Adjuster Bracket Need To Be Replaced On Certain 3508, 3512, And 3516 Engines Washers On The Fan Drive And Fan Drive Adjuster Bracket Need To Be Replaced On Certain 3508, 3512, And 3516 Engines
Certain Remanufactured Turbochargers And Turbocharger Components Need To Be Removed From Parts Stock Certain Remanufactured Turbochargers And Turbocharger Components Need To Be Removed From Parts Stock
The Nut On The Compressor Wheel Needs To Be Tightened On Certain Turbocharger Groups And Turbocharger Cartridge Groups The Nut On The Compressor Wheel Needs To Be Tightened On Certain Turbocharger Groups And Turbocharger Cartridge Groups
Certain Remanufactured 0R2437 and 0R2466 Hydraulic Cylinder Assemblies Need To be Removed From Parts Stock Certain Remanufactured 0R2437 and 0R2466 Hydraulic Cylinder Assemblies Need To be Removed From Parts Stock
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.